Daisy Doll
- 7 hours ago
- 8 min read
04/25/2025
Level of difficulty
Approximate Size: 9.8 in (25 cm) tall.
Materials:
1 skein of Amigurumi yarn – Colors: 5800 (Pistachio), 1289 (Canary), 1730 (Candy Yellow), 7563 (Chantilly), and 8001 (White);;
Scraps of Amigurumi yarn – Color: 8990 (Black);
Safety eyes (12 mm) – Black;
Fiberfill stuffing;
Crochet hooks – B-1 (2.0 mm) and C-2 (2.5 mm);
Tapestry needle;
Hot glue stick or coated galvanized wire;
Stitch marker.
Examples of how to read this pattern:
0th round: 0 sc; → Single round (follow the indicated stitches)0th and 0th round: 0 sc; → 2 identical rounds (follow the indicated stitches)
0th to 0th round: 0 sc; → Rounds with the same sequence (follow the indicated stitches)
0th round: 0 sc, 1 inc, (00 sc, 2 inc) 5x, 0 sc = XX sc; → Round with repetitions in parentheses (follow the indicated stitches and repeat what is inside the parentheses the requested number of times)
0th round: *0 sc, 1 dec* = XX sc; → Round with repetition throughout (repeat what is between asterisks for the entire round)
Stitches Used:
Increase = inc;
Triple Increase = incT;
Chain = ch;
Decrease = dec;
Half Double Crochet = hdc;
Double Crochet = dc;
Slip Stitch = sl st;
Single Crochet = sc.
Instructions:
Legs (2), Body, and Head
Start with Amigurumi yarn 5800 (Pistachio) and a B-1 (2.0 mm) hook.
Begin with the legs.
Rnd 1: 6 sc in a magic ring;
Rnd 2: 6 sc;
Rnd 3: 6 inc = 12 sc;
Rnd 4: 12 sc;
Rnd 5: *3 sc, 1 inc* = 15 sc
Add fiberfill stuffing as you go.
Rnd 6 to 24: 15 sc;
Fasten off the first leg. Make the second leg in the same way and do not cut the yarn. In the next round, join the legs.
Make 4 chains.
Rnd 25: 1 sc joining to the first leg, 14 sc on the first leg, 4 sc on the chains, 15 sc on the second leg = 34 sts;
Rnd 26: 4 sc on the other side of the chains, 34 sc = 38 sc;
Rnd 27 to 35: 38 sc;
Add fiberfill stuffing to the legs.
Change to Amigurumi yarn 8001 (White)
Rnd 36: 38 sc;
Change to Amigurumi yarn 1289 (Canary)
Rnd 37 to 39: 38 sc in back loops only;
Rnd 40 and 41: 38 sc;
Rnd 42: *17 sc, 1 dec* = 36 sc;
Rnd 43: *4 sc, 1 dec* = 30 sc;
Rnd 44: 30 sc;
Rnd 45: *3 sc, 1 dec* = 24 sc;
Change to Amigurumi yarn 7563 (Chantilly)
Rnd 46 (in back loops only): *2 sc, 1 dec* = 18 sc;
Rnd 47: *1 sc, 1 dec* = 12 sc;
Leave on hold and make the waist and collar details.
Waist Detail
With Amigurumi yarn 1289 (Canary) and a C-2 (2.5 mm) hook.
With the legs facing you, insert the yarn at the back of the waistband in the first free loop of round 38 and repeat: *(ch 3, skip 1 st, 1 sl st)*
Follow this sequence to the end of the free loops of round 39 at the waist.
Fasten off and weave in the ends inside the doll.
Note: Leave the free loops of round 37 unworked, as they will be used later to attach the skirt petals.
Collar Detail
With Amigurumi yarn 5800 (Pistachio) and a C-2 (2.5 mm) hook.
With the head opening facing you, insert the yarn at the back of the body, in the first free loop of round 46 (in the yellow loops), and work:
Rnd 1: 24 sc;
Rnd 2: *1 incT in dc, 1 sl st* = 48 sts;
Fasten off and weave in the ends inside the doll.
Body Continuation
Continue with Amigurumi yarn 7563 (Chantilly) and a B-1 (2.0 mm) hook.
Resume where you left off.
Rnd 48 and 49: 12 sc;
Begin the head.
Rnd 50: *1 sc, 1 inc* = 18 sc;
Rnd 51: 1 sc, 1 inc, (2 sc, 1 inc) 5x, 1 sc = 24 sc;
Rnd 52: *1 sc, 1 inc* = 36 sc;
Rnd 53: *5 sc, 1 inc* = 42 sc;
Rnd 54: 3 sc, 1 inc, (6 sc, 1 inc) 5x, 3 sc = 48 sc;
Rnd 55: *7 sc, 1 inc* = 54 sc;
Rnd 56 to 70: 54 sc;
Insert the safety eyes between rounds 59 and 60, with 9 visible stitches between them after placement.
Embroider the eye whites with Amigurumi yarn 8001 (White).
Embroider the eyelashes and eyebrows with Amigurumi yarn 8990 (Black).
Using Amigurumi yarn 7563 (Chantilly), embroider the nose.
Insert the needle one round below the eyes. Make a horizontal stitch, catching about 3 base stitches. Then pass the yarn several times over this stitch, back and forth, until it is completely covered.
Fasten off, hiding the yarn inside the head.
For neck support, insert a piece of hot glue stick or coated galvanized wire so that it sits inside both the head and the body. Fill around the support with fiberfill stuffing as you continue crocheting.
Rnd 71: *7 sc, 1 dec* = 48 sc;
Rnd 72: 3 sc, 1 dec, (6 sc, 1 dec) 5x, 3 sc = 42 sc;
Rnd 73: *5 sc, 1 dec* = 36 sc;
Rnd 74: 2 sc, 1 dec, (4 sc, 1 dec) 5x, 2 sc = 30 sc;
Rnd 75: *3 sc, 1 dec* = 24 sc;
Rnd 76: 1 sc, 1 dec, (2 sc, 1 dec) 5x, 1 sc = 18 sc;
Finish stuffing with fiberfill.
Rnd 77: *1 sc, 1 dec* = 12 sc;
Rnd 78: 6 dec = 6 sc;
Fasten off with a false magic ring.
Eye Sculpting – Step by Step
Mark the inner side of each eye, on the side closest to the center of the face, facing the nose. Choose a point at the top of the head (which will be covered by the hat) to start and finish the process.
Insert the needle through the top of the head and bring it to the inner side of the first eye.Pull the yarn through, leaving a tail at the top of the head (to tie a knot later).Insert the needle one stitch below and go straight to the second eye. Insert the needle on the inner side of the second eye, then bring it back to the top of the head, following the same path as the first eye. As you pull this loop, you will create the indentation in both eyes at the same time.
Pull both ends of the yarn firmly until the eyes reach the desired depth.Tie two or three tight knots at the top of the head and hide the excess yarn between the stitches.
Arms (2)
With Amigurumi yarn 7563 (Chantilly) and a B-1 (2.0 mm) hook.
Rnd 1: 5 sc in a magic ring;
Rnd 2: 5 inc = 10 sc;
Rnd 3: 10 sc;
Rnd 4: *3 sc, 1 dec* = 8 sc;
Rnd 5 to 19: 8 sc;
No need to add stuffing.
Fold and close the sides with 4 sc.
Fasten off, leaving a tail for sewing.
Make the other arm the same way.
Sew the arms to the sides of the body, positioning them approximately two rounds below the green collar.
Hair Base
With Amigurumi yarn 1730 (Candy Yellow) and a B-1 (2.0 mm) hook.
Rnd 1: 6 sc in a magic ring;
Rnd 2: 6 inc = 12 sc;
Rnd 3: *1 sc, 1 inc* = 18 sc;
Rnd 4: 1 sc, 1 inc, (2 sc, 1 inc) 5x, 1 sc = 24 sc;
Rnd 5: *3 sc, 1 inc* = 30 sc;
Rnd 6: 2 sc, 1 inc, (4 sc, 1 inc) 5x, 2 sc = 36 sc;
Rnd 7: *5 sc, 1 inc* = 42 sc;
Rnd 8: 3 sc, 1 inc, (6 sc, 1 inc) 5x, 3 sc = 48 sc;
Rnd 9: *7 sc, 1 inc* = 54 sc;
Rnd 10: *26 sc, 1 inc* = 56 sc;
Rnd 11 to 17: 56 sc;
Switch to a C-2 (2.5 mm) hook.
Rnd 18: 25 sc, (ch 13, skip 2 ch (count as 1 hdc), 1 inc in hdc to the end of the chains, 2 sc on the hair base) 4x, 23 sc.Fasten off, leaving a tail for sewing.
Position the round hair base centered on top of the doll’s head.Arrange the curls at the front of the face, placing three curls on one side and one curl on the opposite side.
Use pins to temporarily secure the base and curls in the desired position.With a tapestry needle and the yarn tail, begin sewing the hair base around the doll’s head.If desired, add a few small hand stitches to keep the curls in place.Fasten off by passing the needle through the inside of the head to hide the yarn.
Hair Bun
With Amigurumi yarn 1730 (Candy Yellow) and a C-2 (2.5 mm) hook.
Rnd 1: 6 sc in a magic ring;
Rnd 2: 6 inc = 12 sc;
Rnd 3: *1 sc, 1 inc* = 18 sc;
Rnd 4: 1 sc, 1 inc, (2 sc, 1 inc) 5x, 1 sc = 24 sc;
Rnd 5: *3 sc, 1 inc* = 30 sc;
Rnd 6: 2 sc, 1 inc, (4 sc, 1 inc) 5x, 2 sc = 36 sc;
Rnd 7 to 10: 36 sc;
Rnd 11: 2 sc, 1 dec, (4 sc, 1 dec) 5x, 2 sc = 30 sc;
Rnd 12: *3 sc, 1 dec* = 24 sc;
Fasten off, leaving a tail for sewing.
Center the bun on the top of the doll’s head.
With a tapestry needle and the yarn tail, begin sewing the bun onto the doll’s hair.
Fasten off by passing the needle through the inside of the head to hide the yarn.
Leaves (2)
With Amigurumi yarn 5800 (Pistachio) and a C-2 (2.5 mm) hook.
Ch 10, skip 1 ch;
Make the second leaf in the same way.
Position the leaves side by side, aligning the bottom tips.
With the green yarn, make a few small stitches to sew these tips together, forming a “V”.
Position the leaves at the base of the bun as shown in the image and sew them in place.
Fasten off by passing the needle through the inside of the head to hide the yarn.
Skirt Petals (9)
With Amigurumi yarn 8001 (White) and a B-1 (2.0 mm) hook.
Rnd 1: 6 sc in a magic ring;
Rnd 2: 6 inc = 12 sc;
Rnd 3 and 4: 12 sc;
Rnd 5: *3 sc, 1 inc* = 15 sc;
Rnd 6: 15 sc;
Rnd 7: *4 sc, 1 inc* = 18 sc;
Rnd 8 and 9: 18 sc;
Rnd 10: *4 sc, 1 dec* = 15 sc;
Rnd 11: 15 sc;
Rnd 12: *3 sc, 1 dec* = 12 sc;
Rnd 13: *2 sc, 1 dec* = 9 sc;
No need to add stuffing.
Fold and close the sides with 4 sc.
Fasten off, leaving a tail for sewing.
Sew the petals using the free loops from round 37 of the body, which were left for this step.
Sew one petal next to the other, working all the way around the body.
Designer by: Gabrielle Oliveira (@estrelinhapreciosa)
Pattern Review: Patty Wolf
Disclaimer: measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern.
See more about...
Comments