11/28/2024 Level of difficulty Approximate size:  3.15”   Materials: Headband; Styrofoam balls – 60 mm; 1 Amigurumi yarn ball - Colors: #8001 (White), #5398 (Moss), #4445 (Tangerine) & #3402 (Círculo Red); Amigurumi yarn scraps – Color: #8990 (Black); Crochet hook – 2.0 mm & 2.5 mm; Safety eyes (8 mm) – Black; Tapestry needle;Polyester stuffing; Locking stitch marker.   Stitch Glossary & Abbreviations: Increase = inc.; Chain = ch.; Decrease = dec.; Slip Stitch = sl st.; Single Crochet = sc.; End of Round = eor; Place Marker = pm.; Back Loops Only = BLO.   Instructions:   Head With the Amigurumi yarn #8001 (White) and 2.5 mm hook 1- 6 sc. inside a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 2 sc., 1 inc. to eor = 24 sc.; 5- 3 sc., 1 inc. to eor = 30 sc.; 6- 4 sc., 1 inc. to eor = 36 sc.; 7 to 15 (9 rounds): 36 sc. Place the safety eyes between rnd. 9 & 10, with 4 stitches between them. Place the styrofoam ball. 16- 4 sc., 1 dec. to eor = 30 sc.; 17- 3 sc., 1 dec. to eor = 24 sc.; 18- 2 sc., 1 dec. to eor = 18 sc. Stuff it. 19- 1 sc., 1 dec. to eor = 12 sc. 20- 3 dec. = 3 sc. (there are leftover stitches in the second-to-last rnd.) Fasten off with a reverse magic ring the leftover sts. from the second-to-last rnd. with the 3 sts. from the last rnd.   Base to cover the headband With the Amigurumi yarn #8001 (White) and 2.5 mm hook 1- 6 sc. inside of a magic ring; Make approximately 80 rnd. of 6 sc. to cover the headband. Fasten off with a reverse magic ring.  Sew the head to the top of the headband.   Nose With the Amigurumi yarn #4445 (Tangerine) and 2.5 mm hook  1- 4 sc. inside of a magic ring; 2- 1 sc., 1 inc. to eor = 6 sc.; 3- 6 sc.; 4- 1 sc., 1 inc. to eor = 9 sc.; 5- 9 sc. Fasten off. Sew or glue between rounds 10 and 14 of the head. Embroider the eyebrows and the mouth with the  Amigurumi yarn #8990 (Black).   Ear Muffs (2) With the Amigurumi yarn #3402 (Círculo Red) and 2.5 mm hook 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- BLO: 12 sc. Fasten off. Make the second piece exactly the same, don’t cut the yarn. To connect the muffs, make 15 ch., attach to one of the sc. on the last round of the first piece and return by making sl sts.   Scarf With the Amigurumi yarn #5398 (Moss) and 2.5 mm hook   Go up 35 ch., skip the 1st one, and work 34 sc.   Created by: Fabiana Gonçalves (@atelielinhaseagulhas) Pattern review by: Patty Wolf Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

11/27/2024 Level of difficulty Approximate size:  6.7” tall                                                                                     Materials: 1 Amigurumi Pelúcia yarn ball - Color: #8001 (White); 1 Amigurumi yarn ball - Color: #3528 (Carmine); 1 Amigurumi Sparkle yarn ball - Color: #5745 (Eucaliptus); Amigurumi Soft yarn scraps – Color: #8990 (Black); Crochet hook – 3.0 mm; Safety eyes (12 mm) – Brown;   Safety nose (7 mm) – Black; Tapestry needle;Polyester stuffing; Locking stitch marker.   Stitch Glossary & Abbreviations: Increase = inc.; Chain = ch.; Decrease = dec.; Half Double Crochet = hdc.; Double Crochet = dc.; Slip Stitch = sl st.; Single Crochet = sc.; End of Round = eor; Place Marker = pm.; Back Loops Only = BLO.     Execution Body With the Amigurumi Pelúcia yarn #8001 (White)   1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 2 sc., 1 inc. to eor = 24 sc.; 5- 3 sc., 1 inc. to eor = 30 sc.; 6- 4 sc., 1 inc. to eor = 36 sc.; 7- 5 sc., 1 inc. to eor = 42 sc.; 8 & 9- 42 sc.; 10- 5 sc., 1 dec. to eor = 36 sc.; 11 to13 (3 rounds)- 36 sc.; 14- 4 sc., 1 dec. to eor = 30 sc.; 15 &16- 30 sc.; 17- 3 sc., 1 dec. to eor = 24 sc.; 18- 24 sc.; 19- 2 sc., 1 dec. to eor = 18 sc. Fasten off, leaving a yarn tail for sewing.   Head With the Amigurumi Pelúcia yarn #8001 (White)   1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 2 sc., 1 inc. to eor = 24 sc.; 5- 3 sc., 1 inc. to eor = 30 sc.; 6- 4 sc., 1 inc. to eor = 36 sc.; 7- 5 sc., 1 inc. to eor = 42 sc.; 8 to 12 (5 rounds)- 42 sc.; 13- 5 sc., 1 dec. to eor = 36 sc.; Place the safety eyes between rnd. 12 & 13, with 8 visible stitches between them. 14- 36 sc.; 15- 4 sc., 1 dec. to eor = 30 sc.; 16- 3 sc., 1 dec. to eor = 24 sc.; 17- 2 sc., 1 dec. to eor = 18 sc. Stuff it. Fasten off. Sew the head onto the body. With the Amigurumi Soft yarn #8990 (Black), embroider the nose, mouth and eyebrows.   Snout With the Amigurumi Pelúcia yarn #8001 (White) 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 2 sc., 1 inc. to eor = 24 sc.; 5- 11 sc., 1 inc. to eor = 26 sc.; 6 & 7- 26 sc.; 8- 11 sc., 1 dec. to eor = 24 sc. Fasten off, leaving a yarn tail for sewing. Place the safety nose and embroider the details with the Amigurumi Soft yarn #8990 (Black)  between rnd. 2 & 3. Sew onto the head. Stuff the piece before you finish sewing.   Ears (2) With the Amigurumi Pelúcia yarn #8001 (White)  1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 18 sc.; 5- 1 sc., 1 dec. to eor = 12 cs. Fasten off, leaving a yarn tail for sewing.Sew onto the head.   Legs (2) With the Amigurumi Pelúcia yarn #8001 (White)  1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 2 sc., 1 inc. to eor = 24 sc.; 5 & 6- 24 sc.; 7- 2 sc., 1 dec. to eor = 18 sc.; 8- 18 sc.; 9- 1 sc., 1 dec. to eor = 12 sc.; 10 to 12 (3 rounds): 12 sc.Fasten off, leaving a yarn tail for sewing. Add some stuffing halfway up.Sew onto the body.   Arms (2) With the Amigurumi Pelúcia yarn #8001 (White) 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4 to 6 (3 rounds)- 18 sc.; 7- 1 sc., 1 dec. to eor = 12 sc.; 8- 12 sc.; 9- 3 sc., 3 dec., 3 sc. = 9 sc.; 10 to 15 (6 rounds): 9 sc. Fasten off, leaving a yarn tail for sewing. Add some stuffing halfway up. Sew to the sides of the body at the neck height   Sweater Start with Amigurumi Sparkle yarn #5745 (Eucaliptus) Go up 17 ch. 1- 27 inc. of dc. = 54 dc.; 2- 1 dc., 1 inc. of dc. to eor = 81 dc.; Let’s set the 4 markers to make the sleeves.Set aside 18 stitches for each sleeve and place the markers so that the back and front each have 22 stitches. 3- Make 12 dc., skip to the st. after the 2nd marker, make 22 dc., skip to the st. after the 4th marker, make 10 more dc., and close with a sl st. We will not work in spiral crochet; each round will be finished with a sl st., going up 1 ch. to add height before continuing with circular crochet. 4 to 6 (3 rounds)- 44 dc. Change to Amigurumi yarn #3528 (Carmine) 7- 44 dc. Fasten off.   Sleeves (2) Start with the Amigurumi Sparkle yarn #5745 (Eucaliptus) 1- 18 dc. over the stitches you left reserved at the previous marked point. 2 to 4 (3 rounds)- 18 dc. Change to Amigurumi yarn #3528 (Carmine) 5- 18 dc. Fasten off. Turn the sweater inside out and sew the small hole under the arms.   Scarf With the Amigurumi yarn #3528 (Carmine) Go up 70 ch., skip the 1st one. 1- 69 hdc.; 2- BLO: 69 hdc. Fasten off.   Hat Start with the Amigurumi Sparkle yarn #5745 (Eucaliptus) 1- 6 sc. inside of a magic ring; 2- 1 sc., 1 inc. to eor = 9 sc. Note: pm. on first sc.; 3- 9 sc. Change to Amigurumi yarn #3528 (Carmine) 4- 2 sc., 1 inc. to eor = 12 sc.; 5- 12 sc.; 6- 2 sc., 1 inc. to eor = 16 sc. Change to Amigurumi Sparkle yarn #5745 (Eucaliptus) 7- 16 sc.; 8- 3 sc., 1 inc. to eor = 20 sc.; 9- 20 sc. Change to Amigurumi yarn #3528 (Carmine) 10- 4 sc., 1 inc. to eor = 24 sc.; 11- 24 sc.; 12- 3 sc., 1 inc. to eor = 30 sc. Change to Amigurumi Sparkle yarn #5745 (Eucaliptus) 13-30 sc.; 14- 4 sc., 1 inc. to eor = 36 sc.; 15- 36 sc. Change to Amigurumi yarn #3528 (Carmine) 16- 5 sc., 1inc. to eor = 42 sc.; 17- 42 sc.; 18- 6 sc., 1 inc. to eor = 48 sc. Change to Amigurumi Sparkle yarn #5745 (Eucaliptus) 19 to 21 (3 rounds)- 48 sc. Change to Amigurumi yarn #3528 (Carmine) 22 to 24 (3 rounds)- 48 sc. Change to Amigurumi Sparkle yarn #5745 (Eucaliptus) 25 to 27 (3 rounds)- 48 sc. Change to Amigurumi yarn #3528 (Carmine) 28 to 30 (3 rounds)- 48 sc. Change to Amigurumi Sparkle yarn #5745 (Eucaliptus) 30 to 33 (3 rounds)- 48 sc. Change to Amigurumi Pelúcia yarn #8001 (White) 34 to 37 (4 rounds)- 48 sc. Fasten off.   Pom-pom With the Amigurumi Pelúcia yarn #8001 (White) 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 2 sc., 1 inc. to eor = 24 sc.; 5- 24 sc.; 6- 2 sc., 1 dec. to eor = 18 sc. Stuff a little bit. 7- 1 sc., 1 dec. to eor = 12 sc.; 8- 6 dec. = 6 sc. Fasten off with a reverse magic ring.   Created by: Paula de Tassia Ferreira (@crochedapaula1) Pattern review: Patty Wolf Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

11/16/2024 Level of difficulty MATERIAL 1 skein of Amigurumi Sparkle Yarn - Color: 3528 (Carmine) or any color you prefer 2.75 mm / C-2 crochet hook Scissors Tapestry needle Liquid Silicone Glue   Stitches and techniques used Chain (ch) Slip stitch (sl st) Single crochet (sc) Double crochet (dc) Half double crochet (hdc) Remember: Always use 3 ch as the first dc of each round, close every round with a sl st, and move to the next space with a sl st.   Round 1:  Start with a magic ring, chain 3 (counts as 1 dc), then work 1 dc, 1 ch, and 2 dc into the ring. Continue with this pattern to create a total of 6 groups of 2 dc separated by 1 ch (12 dc total). Close the round with a sl st.   Rounds 2 to 5: Work 6 shells of 2 dc, 1 ch, and 2 dc in each shell, totaling 24 dc per round.   Round 6: In the center of each shell, make 7 dc, and between each shell, make 1 sc.   Round 7: Finish with a round of single crochet (sc) around the entire edge.   Make a chain of 44. Starting from the hook, count 30 ch and join with a sl st to create a loop. Work sl st in each ch to the end of the cord. At the end, chain 2, make 5 hdc into the loop, totaling 6 hdc. Close with a sl st in the initial 3 ch and fasten off.   Use a drop of Liquid Silicone Glue to secure the pendant onto the bell. Designer:  Joana Gouveia, @FiosCruzados Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

Materials 1 ball of Anne (147g / 5.18 oz) or 1 ball of Anne (73g / 2.58 oz) for each color - Colors: 8176 (Off-White), 7382 (Chocolate); Círculo crochet hook - no. 2.5 mm. Size:  One size fits all. Level of difficulty                               07/05/2024                      INSTRUCTIONS   Stitches used: Chain stitch (ch.). Slip stitch (sl st.): Insert the hk., yo., pull up a loop, and pass directly through the loop on the hk. Single crochet:  (sc.): insert the hk., yo., pull up a loop, yo. again, pull through all loops. Double crochet: (dc.): yo., insert the hk., yo., pull up a loop, yo., pull through 2 loops, yo. again, pull through all the loops. Top:  follow the chart. Pattern stitch 1 and 2: follow the corresponding chart. Illustrative stitch:  See chart - how to work charts 1 and 2. Sample: A 10 cm / 3.94" square in sc. with double yarn and a 2.5 mm hk. = 20 sts. x 18 rows.   Instructions:  The bucket hat is entirely worked with double yarn. Start at the top of the bucket hat. Make a ch. of 4 sts., close it into a circle, and work the top of the hat following the chart. After completing the chart, work around the side of the hat as follows: 1 row with Off-White yarn in pattern st. no. 1 following the corresponding chart, repeat from to in the direction of the sts. (23x), 1 row with chocolate yarn in pattern st. no. 2 following the corresponding chart, in front of pattern st. no. 1, repeat from to in the direction of the sts. (23x). Always repeat these two rows, but in the rows with Off-White yarn, pick up also the 2 ch. of the pattern st. with the chocolate ch. (see illustration stitch). The charts are finished. For the brim, work all around 11 rows in sc. with chocolate yarn. Make the 1st row of sc. working through both thicknesses of the pattern sts. on the sides. Once the 11 rows in sc. are finished, fasten off. Artisan:  Henrique Silva Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

Materials 2 balls of Anne (147g / 5.18 oz) or 4 balls of Anne (73g / 2.58 oz) - Color: 8176 (Off-White); 2.5 mm Círculo crochet hk.; Tracing paper; Pencil; Scissors; Tape measure. Size:  One size fits all. Level of difficulty                               07/05/2024                      INSTRUCTIONS  Crochet stitches used: ch.: chain stitch, sl st.: slip stitch, sc.: single crochet, dc.: double crochet, bucket hat: follow diag. 1.   Abbreviations: foll.: following,  hk.: hook,  R.: row,  diag.: diagram, st.: stitch,  sts.: stitches,  wk.:  work   Sample: A 10 cm / 3.94" square in dc. with a 2.5 mm hk. = 22 sts. x 11 R.    Instructions:   Transfer the molds to tracing paper to use as a reference when making the piece. Note the arrows on the measurement chart indicating the direction of the work.   Bucket hat: Use a 2.5 mm crochet hk. and Anne yarn (double strand) in Off-White color, start the piece from the top of the head. Make a magic ring, 1st R.: 3 ch., 13 dc., 1 sl st. to close the R. From the 2nd to the 20th R., continue following diag. 1. Wk. the entire piece in circular R.   Artisan: Círculo Studio Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

11/08/2024 Level of difficulty This pair of socks is knitted toe-up, so it’s totally customizable. It uses an after-thought heel, which is easy to replace when worn out.   MATERIAL 100 g / 3.52 oz of Lucky Feet - color 9172 1 kit of 4 or 5 dpns (double-pointed needles) size 2. You can also use a long circular needle size 2 with two magic loops; in this case, ignore references to dpns. 1 fine tapestry needle to graft stitches and hide ends. You should know how to cast on stitches invisibly to begin a sock by the toe (we recommend Judy’s magic cast-on), how to bind off stitches in a loose and stretchy way and how to graft stitches.   Abbreviations BOR = beginning of round dpn(s) = double pointed needle(s) k = knit k2tog = knit two stitches together. kfb = knit one stitch from the front and the back (1 stitch increased) p = purl ssk = slip 1 stitch knitwise, slip another stitch knitwise, insert the left needle through the front of the 2 slipped stitches and knit them together. st = stitch, stitches Gauge 2 inches = 13 st × 19 rounds   Sizes:  12, 13, 3 [children] (6, 9, 11 [women]), 8, 10, 12 [men] Sock Length:  7, 8, 8½ (8½, 9½, 10¼), 9½, 10¼, 10¾ inches Sock circumference:  6¼, 6½, 7½ (7¾, 8½, 9¼) 8½, 9¼, 9¾ inches Execution TOE Using Judy’s magic cast-on (or any other method that you prefer), cast on a total of 20, 22, 24 (24, 24, 24) 24, 24, 24  st on two dpns [10, 11, 12 (11, 12, 12) 12, 12, 12 st on each dpn]. Note:  First half of stitches: instep. Next half of stiches: sole Round 1: knit. Round 2: k1, kfb, k to last 2 st, kfb, k1, repeat from Repeat rounds 1 and 2 until you get 40, 44, 48 (52, 56, 60) 56, 60, 64 st total. As soon as you get to 32 st total, it’s easier to distribute your stitches evenly on all dpns. Mark the beginning of the rounds with a marker/piece of thread in the first st. K 1 round. Note:  First half of stitches: instep. Next half of stiches: sole   Customization note:  try the sock on to check if the circumference is ok before going on.   FOOT   Moss stitch: Rounds 1 and 2:   k1, p1, repeat from until end of instep. Knit sole stitches. Rounds 3 and 4:   p1, k1, repeat from until end of instep. Knit sole stitches. Repeat these 4 rounds for 44, 54, 54 (50, 56, 64) 56, 60, 60 rounds or until the sock reaches the beginning of the leg. End with an odd round. Next Round:  Make the corresponding even round but knit just the instep. Use a piece of waste yarn (preferably cotton or other slippery yarn in a distinct color but similar thickness) to knit the sole st. Return to the end of instep and knit the sole again with the working yarn. The waste yarn will hold the heel stitches together until it’s time to make the heel.   LEG Rounds 1 and 2:   k1, p1, repeat from until end of instep. Knit sole stitches. Rounds 3 and 4:  k2, p1, k1, repeat from until 2 st to end of instep; k2. Knit sole stitches. Rounds 5 and 6:  k4, k1, p1, repeat from until 4 st to end of instep; k4. Knit sole stitches. Rounds 7 and 8:  k6, p1, k1, repeat from until 6 st to end of instep; k6. Knit sole stitches. Follow this same pattern reducing the number of moss stitches until all the stitches are knitted plain. Next 8, 8, 8 (10, 10, 10) 12, 12, 12 rounds:  k (You can knit more or less rounds if you want a longer or shorter leg) Next 20 rounds:   k2, p2, repeat from Bind off loosely.   HEEL With one dpn, pick up stitches along the bottom of the waste yarn. With another dpn, pick up stitches above the waste yarn. Now you have 40, 44, 48 (52, 56, 60) 56, 60, 64 st total on your dpns. You can reorganize them as you wish. Mark BOR (always between instep and sole stitches). Carefully remove the waste yarn. Setup round:  Knit. When you get to the gap between sole and leg stitches, pick up 1 additional twisted st. Repeat on the other side. Now shape the heel: Round 1: k1, ssk, k to 3 st before end of the first half of heel, k2tog, k1, repeat from Round 2: k Repeat these two rounds until you have 5, 5, 5 (9, 9, 9) 9, 9, 9 st between decreases. Graft sole stitches to leg stitches to finish off the heel. With a thin tapestry needle, hide your ends. Designer:  Círculo Studio Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

03/08/2023 Level: Intermediate Size: 14 Material Yarn Quantity by Size - color #6092 (Magenta); XS : 2 balls of Anne Sparkle / 4 balls of Anne 250 S : 2.5 balls of Anne Sparkle / 5 balls of Anne 250 M : 2.75 balls of Anne Sparkle / 5.5 balls of Anne 250 L : 3 balls of Anne Sparkle / 6 balls of Anne 250 XL : 3 balls of Anne Sparkle / 6 balls of Anne 250 2X : 3.5 balls of Anne Sparkle / 7 balls of Anne 250 Crochet hook D-3 or size to obtain gauge; Measuring tape, tapestry needle and scissors. Created by: Angela Schmitt Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

11/04/2024 Level of difficulty MATERIALS 1 skein of T-shirt yarn – Colors: 8001 (White) e 8225 (Chromium); 9.0 mm Círculo crochet hook; 2 Círculo round metal handles- 12.5 cm – Color: 10 (Silver); Fabric for the lining.   Stitch Glossary and Abbreviations: chain (ch.). Slip stitch  (slst): insert the hook, yo, draw it through the st and the loop on the hook. Single crochet  (SC): insert the hook, yo, draw it through the st, yo, draw it through both loops on the hook.  Half double crochet  (HDC): yo, insert the hook, yo, draw it through the st, yo, draw it through all 3 loops on the hook. Finishing stitch: leave the yarn on the WS of the work and insert the hook from the RS between 2 sts from the previous round, yo, draw it through the sts, leave it on the hook; insert the hook between the 2 next sts, yo and draw it through the sts, draw it through the loop already on the hook . Base: follow the chart.   Elongated stitch pattern: follow the chart.  Gauge: 10 x 10 cm square in SC, using a 9.0 mm hook = 10 sts x 10 rows. One size only Execution: Bag– start by the base. Using the color Chromium ch 6, slst into the 1st st to join the round and make the base following the chart. Make 2 rnds in white, 2 in chromium and 2 in white again. When you finish the base, follow the body st pattern, according to the chart. Make the 1st rnd with 58 sts on the BLO. Continue working in the round with the same number of sts, end each rnd with a slst into the 1st st and start the next one with a ch 1, until you’ve worked 4 rounds after the base. Follow the chart, working in the elongated stitch pattern and changing colors as indicated. After you finish the chart, work in HDC as follows: 2 rnds in white, 1 in chromium, 2 in white; then make 1 rnd of SC and 1 finishing stitch rnd in chromium, then fasten-off. When making the SC rnd attach one handle to each side, as follows: 10 SC, make the next 9 SC attaching the handle when making the sts, 20 SC, 9 more SC attaching the second handle. Finish the rnd with the last 10 SC.   Finishing– cut the lining and seam it to the bag.   Designer:  Kathia Roberta Beillo Moraes Pattern review:  Patty Wolf Pattern translation: Beatriz Magalhães (@bybeacrochet) Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

11/03/2024 Level of difficulty MATERIALS 1 skein of Amigurumi in the colors: 6006 (Candy Lilac) e 6399 (Azalea); 1 skein of Amigurumi Pelúcia in the color 8001 (White); 2.5 mm crochet hook; Black safety eyes (8 mm); Stuffing; Tapestry needle.   Stitch Glossary and Abbreviations: Increase = inc.; Chain = ch; Decrease = dec; Double crochet = DC; Single crochet = SC. Approximated Size: 7.87 in Execution: Head Using Amigurumi yarn in the color 6006 (Candy Lilac) 1st round: 6 SC into a magic ring; 2nd round: 6 inc. = 12 SC; 3rd round: 1 SC, 1 inc. = 18 SC; 4th round: 2 SC, 1 inc. = 24 SC; 5th round: 3 SC, 1 inc. = 30 SC; 6th round: 4 SC, 1 inc. = 36 SC; 7th round: 5 SC, 1 inc. = 42 SC; 8th round: 6 SC, 1 inc. = 48 SC; 9th round: 7 SC, 1 inc. = 54 SC; 10th to 16th round (7 rounds): 54 SC; 17th round: 8 SC, 1 inc. = 60 SC; 18th to 25th round (8 rounds): 60 SC Place the safety eyes between rounds 18 and 19, with 10 stitches between them. 26th round: 8 SC, 1 dec. = 54 SC; 27th round: 7 SC, 1 dec. = 48 SC; 28th round: 6 SC, 1 dec. = 42 SC; 29th round: 5 SC, 1 dec. = 36 SC; 30th round: 4 SC, 1 dec. = 30 SC; 31st round: 3 SC, 1 dec. = 24 SC; 32nd round: 2 SC, 1 dec. = 18 SC Stuff the piece. 33rd round: 1 SC, 1 dec. = 12 SC; 34th round: 6 dec. = 6 SC Fasten-off using the inverted magic ring technique. Body Start with Amigurumi yarn in the color 6006 (Candy Lilac) 1st round: 8 SC into a magic ring; 2nd round: 8 inc. = 16 SC; 3rd round: 1 SC, 1 inc. = 24 SC; 4th round: 2 SC, 1 inc. = 32 SC; 5th round: 32 SC; 6th round: 3 SC, 1 inc. = 40 SC; 7th round: 4 SC, 1 inc. = 48 SC; 8th to 14th round (7 rounds): 48 SC; 15th round: 4 SC, 1 dec. = 40 SC; 16th to 18th round (3 rounds): 40 SC; 19th round: 3 SC, 1 dec. = 32 SC; 20th to 22nd rounds (3 rounds): 32 SC; 23rd round: 2 SC, 1 dec. = 24 SC; 24th round: 24 SC Fasten-off, leaving a yarn tail for seaming. Stuff the piece. Seam it to the head. Snout Using Amigurumi yarn in the color 6399 (Azalea) 1st round: 8 SC into a magic ring; 2nd round: 1 SC, 1 inc. = 12 SC; 3rd and 4th rounds: 12 SC; 5th round: 2 SC, 1 inc. = 16 SC; 6th round: 16 SC; 7th round: 2 SC, 1 dec. = 12 SC; Stuff it, fold it in half and seam it to rounds 17 and 24 of the head. Using  Amigurumi Pelúcia in the color  8001 (White),  embroider 2 straight lines at the bottom of the snout. Outer ear (2) Using Amigurumi yarn in the color 6006 (Candy Lilac) 1st round: 8 SC into a magic ring; 2nd round: 8 inc. = 16 SC; 3rd round: 1 SC, 1 inc. = 24 SC; 4th round: 24 SC; 5th round: 2 SC, 1 inc. = 32 SC; 6th to 8th rounds (4 rounds): 32 SC Work flat; ch 1 and turn at the end of each row. 9th and 10th rounds: 16 SC; 11th round: 1 dec., 12 SC, 1 dec. = 14 SC; 12th round: 1 dec., 10 SC, 1 dec. = 12 SC; 13th round: 32 SC around the ear; 14th round: 2 SC, 1 dec. = 24 SC Fasten-off, leaving a yarn tail for seaming. Seam it between rounds 7 and 19 of the head, curving it slightly to shape it and leaving the flat rows at the bottom.. Ear spots (2) Using Amigurumi Pelúcia  in the color 8001 (White) 1st round: 6 DC into a magic ring; 2nd round: 6 SC Fasten-off, leaving a yarn tail for seaming. Seam it to the outer part of the ear, close to the head. Belly spot Using Amigurumi Pelúcia  in the color 8001 (White) Ch 7. 1st round: skip 2 chs, 4 DC, 4 DC into the last chain, 4 DC on the other side of the chs = 12 DC; 2nd round: 4 DC, (1 DC, 1 inc. in DC) 4x, 4 DC = 16 DC Fasten-off, leaving a yarn tail for seaming. Seam it close to the neck. Arms (2) Using Amigurumi in the color 6006 (Candy Lilac) 1st round: 6 SC into a magic ring; 2nd round: 6 inc. = 12 SC; 3rd round: 1 SC, 1 inc. = 18 SC; 4th to 7th rounds (4 rounds): 18 SC; 8th round: 7 SC, 1 dec. = 16 SC; 9th round: 1 dec., 6 SC = 14 SC; 10th round: 14 SC; 11th round: 5 SC, 1 dec. = 12 SC; 12th to 20th round (9 rounds): 12 SC; 21st round: 2 SC, 1 dec. = 9 SC Fasten-off, leaving a yarn tail for seaming. Stuff it until the 18th round Fold it in half and seam it to the body. Legs (2) Start with Amigurumi in the color 6399 (Azalea) 1st round: 6 SC into a magic ring; 2nd round: 6 inc. = 12 SC; 3rd round: 1 SC, 1 inc. = 18 SC; 4th round: 18 SC Switch to Amigurumi in the color 6006 (Candy Lilac) 5th round (in the back loop only): 2 SC, 1 inc. = 24 SC; 6th round: 24 SC; 7th round: 6 SC, 6 dec., 6 SC = 18 SC; 8th to 10th round (3 rounds): 18 SC; 11th round: 1 SC, 1 dec. = 12 SC; 12th round: 12 SC; 14th round: 12 inc. = 24 SC; 15th round: 2 SC, 1 inc. = 32 SC; 16th to 18th rounds (3 rounds): 32 SC; 19th round: 2 SC, 1 dec. = 24 SC; 20th round: 12 dec. = 12 SC Fasten-off, leaving a yarn tail for seaming. Stuff it until the 12th round Fold it in half and seam it to the body. Tail Using Amigurumi in the color 6006 (Candy Lilac) 1st round: 6 SC into a magic ring; 2nd round: 6 inc. = 12 SC; 3rd round: 1 SC, 1 inc. = 18 SC; 4th round: 18 SC; 5th round: (3 SC, 1 dec., 2 SC, 1 dec.) = 14 SC Fasten-off, leaving a yarn tail for seaming. Seam it between rounds 6 and 11, on the back of the body.   Designer:  Shirley Borges (@pepetosarteemcroche) Pattern review:  Patty Wolf Pattern translation: Beatriz Magalhães (@bybeacrochet) Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

11/02/2024 Level of difficulty MATERIALS 2 Náutico Poly yarn rolls – Color #7148 (Craft); Crochet hook – 6.0 mm; Sewing needle – Size #2; 1 Maxxi Retrós thread – Color #927 (Atacama); Square Wooden Handle, Size: 5.5” x 5.5"  – Color #10; Tapestry needle; Cotton calico fabric for bag lining; Scissors; Measuring tape.   Abbreviations:  r.: row , rnd.: round , diag.: diagram , st.:  stitch , sts.: stitches , rep.: repeat , mk.: make .   Stitch Glossary:   ch.: chain , sl st.: slip stitch , sc.: single crochet , dc.: double crochet , , popcorn st.:  pull the loops of 4 double crochets onto the hook and close them together with 1 sl st.,  bag base:  follow diag. 1, strip for the sides and bottom of the bag :  follow diag. 2. Gauge: A 4-inch square in the stitch of the bag base and using a 6.0 mm crochet hook = 10 sts. x 5 rows. Aproximated size:   13” x 18” Execution: Bag base (front part):  use Náutico Poly Yarn and a 6.0 mm crochet hook. Start the piece from the bottom, working in back-and-forth rows. Work a 45-ch cord; on this cord, work following diagram 1 and the repeat pattern from the 1st to the 17th row.For finishing, work 1 rnd. of sc. all around the piece. Switch to the tapestry needle and attach the handle to the center of the piece with basting stitches. Set the piece aside.  Bag base (back part):  the same as the front part of the bag. Strip for the sides and bottom of the bag:  use Náutico Poly Yarn and a 6.0 mm crochet hook. Start the strip with a 7-ch cord, work following diag. 2 and repeat until you reach a length of 30 inch. Work in back-and-forth rows. Fasten off the yarn and set the piece aside. Assembly: use Náutico Poly Yarn and tapestry needle. Join the front and back by sewing the strip to the sides and bottom of the bag. Attach the lining using the sewing needle and Maxxi Retrós thread with basting stitches.   Designer:  Kathia Beillo Pattern review:  Patty Wolf Pattern translation: FuriFuri Amigurumi Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

This Thanksgiving holiday, let yourself be swept away by the love and unconditional support between the super cute couple Lara and Raul! Enjoy! eBook Here Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

11/01/2024 Level of difficulty MATERIALS 1 spool of Nautico 5 mm (500 g) – Color: 4484 (Ember); Círculo 6.0 mm Círculo crochet hook; Círculo tapestry needle; Acrylic chain strap- (80 cm) golden with a carabiner on each end; Rectangular golden handle - (9 x 8 x 11cm); Knitted fabric for the lining; 1 spool of Maxxi Retrós – Color: 165 (Carrot); Círculo sewing needle- no. 2; Círculo golden magnetic button (14 mm x 14 mm); Scissors; Measuring tape.   Abbreviations: rnd: round, rnds: rounds,  FO: fasten-off,  MR: magic ring. Crochet stitches used: ch: chain, slst: slip stitch, SC: single crochet, DC:  double crochet, triangle: follow chart 1. Gauge: granny triangle (chart. 1 – rows 1-3), with a 6.0 mm hook = 5.12 inches x 5.12 inches Approximate size: 28 cm x 28 cm (11.02″ x 11.02″) Execution:   Square:  use Nautico yarn in the color Ember and a 6.0 mm crochet hook.  Start with a MR. 1st rnd: ch 5, {5 DC, ch 2}, repeat {} 1 more time, 4 DC, 1 slst to join the round. 2nd and 3rd rnds: continue following chart 1.   Front of the bag : you ’re gonna need 6 triangles to create the front panel. Using Nautico yarn in the color Ember and a tapestry needle, join 3 triangles with running stitches. With the 6.0 mm hook, work 1 row of SC on the wider base of the panel. Cut the yarn and repeat this process one more time- you should have 2 equal pieces with 3 triangles each. Return to the tapestry needle and join both panels through the SC rows, using running stitches. FO and reserve the panel.   Back of the bag : same as the front .   Finishing and lining : using Nautico in the color Ember and a tapestry needle, join the front and back panels with ru nning stitches- seam the sides and bottom and leave the top open (30 cm). Position the handles in the center of the opening edges and, using the 6.0 mm hook, attach it with 10 slsts. Attach the chain strap to the sides, using the carabiners. Cu t the fabric according to  the measurements of your bag and seam it to the inside of the bag with running stitches, using Maxxi retrós in the color Carrot and a no. 2 sewing needle. Seam the magnetic button to the bag opening.   Designer: Kathia Roberta Beillo Moraes Traduction: Isabela Tavares Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

10/29/2024 Level of difficulty MATERIALS 2 balls of Premium T-shirt Yarn – Color: 7316 (Hena); Círculo crochet hook – 9.0 mm; Círculo sewing needle – no. 2; 1 spool of Maxxi Retrós – Color: 228 (Nectarina); Rectangular metal handle (11 cm x 8 cm / 4.33” x 3.15”) - Color: 20 (Gold); Heart lobster clasp (46 mm x 46 mm) – Color: 20 (Gold); Círculo tapestry needle; Unbleached fabric for lining; Scissors; Measuring tape.   Abbreviations: foll.: following, hk.: hook, approx.: approximately, rnd.: round, diag.: diagram, st.: stitch, sts.: stitches, rep.: repeat or repetition, wk.: work or working, x: times. Crochet stitches used: ch.: chain stitch, sl st.: slip stitch, sc.: single crochet, bobble: pull up loops from 3 dc. on hook and finish them together with 1 sl st., pattern st. (A): follow diag. 1, pattern st. (B): follow diag. 2. Sample: a 10 cm (3.94”) square in pattern st. (B) using a 9.0 mm crochet hk. = 8 sts. x 5 rows. Approximate size: 25 cm x 33 cm (9.84″ x 12.99″) Execution:   Bag bottom: use the T-shirt yarn and 9.0 mm crochet hook. Start the piece from the bottom wk. in rounds. Wk. a chain of 21 ch. sts. Rnd.1: 1 ch., 48 sc., 1 sl st. to close the round. Rnd.2: wk. in pattern st. (A) foll. diag. 1. Bag base: Continue the piece in rounds in pattern st. (B) foll. diag. 2 and the rep. st. from rounds 3 to 16. Finishing: Center the handles on the front and back parts. Use the T-shirt yarn in Hena Neon color and tapestry needle, and attach them with running sts. in the 15th rnd. Attach the lining using sewing needle no. 2 and Maxxi Retrós thread in Nectarina color, making running stitches. Tassel: Use the T-shirt yarn in Hena color. Cut 17 strands of 15 cm (5.91″) each and fold them in half. Using a helper strand approx. 20 cm (7.87″), at 1 cm (0.39″) from the top edge, tie all strands together by wrapping the helper strand around them several times; secure it with a knot. Make two identical pieces and set them aside. Cord: Use the T-shirt yarn in Hena color and 9.0 mm crochet hk. Wk. a chain of 30 cm (11.81″) in ch. st. Attach the two tassels to the ends of this cord. Fold the cord in half and attach it to the heart lobster clasp ring. Attach the lobster clasp to the front below the handle.   Designer: Kathia Roberta Beillo Moraes Traduction: Isabela Tavares Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

10/30/2024 Level of difficulty MATERIALS 1 Náutico Poly yarn roll – Color #5398 (Forest Green); Crochet hook – 6.0 mm; 2 Hinged hings size 32 mm – Color Golden; Thick metal chain handle 47” – Color #20 (Golden); 3 Magnetic buttons size 18 mm x 18 mm – Color #20 (Golden); Scissors; Measuring tape.   Stitch Glossary and Abbreviations: ch.: chain,  sl st.: slip stitch,  crab st.: reverse single crochet stitch.,  sc.: single crochet,  dc.: double crochet, dc2tog.:  2 double crochet closed together in the same base stitch,  bag base:  follow diag. 1, base for the sides:  follow diag. 2. r.: row, rnd.: round , diag.: diagram,  st.:  stitch,  sts.: stitches,  rep.: repeat,   mk .: make. Gauge: A 4-inch square in the stitch of the bag base (diag. 1) and using a 6.0 mm crochet hook = 10 sts. x 9 rows Aproximated Size:  8.” x 18”. Execution: Bag base (front part and back part):  use Náutico Poly Yarn and a 6.0 mm crochet hook. Start the piece from the bottom, working in circular rounds. Work a rnd. of 34 ch., on both sides of the foundation chains of this rnd. work the 1st rnd.: 1 ch., 70 sc., 1 sl st. to close the rnd. From the 2nd to the 19th rnd., continue following diag. 1. Base for the sides:  use Náutico Poly Yarn and a 6.0 mm crochet hook. Join the yarn on each side of the piece and work following diag. 2 from the 20th to the 22nd.  Finishing: attach the hinged rings to each base of the crocheted sides and then attach the thick metal chain handle. On the inside of the bag, attach the 3 magnetic buttons.     Designer:  Kathia Beillo (@Fada do Croche) Pattern review:  Patty Wolf Pattern translation: Ana Karolina (@furifuri) Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

10/31/2024 Level of difficulty MATERIALS 1 Amigurumi yarn ball – Color: #7563 (Chantilly); 1 Amigurumi yarn ball – Glow; Rubi yarn – Color: #7386; Amigurumi yarn scraps – Color: #7625 (Chestnut); Crochet hook – 2.5 mm; Tapestry needle; Polyester stuffing;Craft glue; Make up and brush (optional).   Stitch Glossary and Abbreviations: Increase = inc.; Chain = ch.; Decrease = dec.; Double Crochet = dc.; Slip Stitch = sl st.; Single Crochet = sc. Approximate size: 5” Execution: Body and Head Start with Amigurumi Glow yarn 1 - 6 sc. inside of a magic ring; 2 - 6 inc. = 12 sc. Note: pm. on first sc.; 3 - 1 sc., 1 inc. to eor = 18 sc.; 4 - 2 sc., 1 inc. to eor = 24 sc.; 5 - 3 sc., 1 inc. to eor = 30 sc.; 6 - 4 sc., 1 inc. to eor = 36 sc.; 7 to 13 (7 rounds) - 36 sc.; 14 - 4 sc., 1 dec. to eor = 30 sc.; 15 - 30 sc.; 16 - 3 sc., 1 dec. to eor = 24 sc.; 17 & 18 - 24 sc.; Stuff it. 19 - BLO: 24 sl st.; 20 - FLO (in the loops of round 18): 1 sc., 1 inc. to eor = 36 sc.; 21 - 2 sc., 1 inc. to eor = 48 sc.; 22 - 7 sc., 1 inc. to eor = 54 sc.; From the next round on, use the Glow yarn and the Amigurumi yarn color #7563 (Chantilly)  in the same round using the jacquard technique (leaving the yarn loose inside the amigurumi). Change to the Amigurumi yarn color #7563 (Chantilly) in the bold part. 23 - 23 sc., 8 sc.,  23 sc. = 54 sc.; 24 - 21 sc., 12 sc.,  21 sc. = 54 sc.; 25 - 20 sc., 14 sc.,  20 sc. = 54 sc.; 26 - 19 sc., 16 sc.,  19 sc. = 54 sc.; 27 to 30 (4 rounds) - 54 sc.; (aqui parece estar faltando os pontos em chantilly) 31 - 19 sc., 16 sc.,  19 sc. = 54 sc.; 32 - 20 sc., 14 sc.,  20 sc. = 54 sc.; 33 - 21 sc., 12 sc.,  21 sc. = 54 sc.; 34 - 23 sc., 8 sc.,  23 sc. = 54 sc.; Fasten off the Amigurumi yarn color #7563 (Chantilly) and continue only with the  Amigurumi Glow yarn. 35 - 54 sc.; 36 - 7 sc., 1 dec. to eor = 48 sc.; 37 - 6 sc., 1 dec. to eor = 42 sc.; 38 - 5 sc., 1 dec. to eor = 36 sc.; 39 - 4 sc., 1 dec. to eor = 30 sc.; 40 - 3 sc., 1 dec. to eor = 24 sc. Stuff the head. 41 - 2 sc., 1 dec. to eor = 18 sc.; 42 - 1 sc., 1 dec. to eor = 12 sc.; 43 - 6 dec. = 6 sc. Fasten off with a reverse magic ring. With double strand of Ruby yarn #7386 , embroider the eyes on round 29 with 3 stitches wide and 6 stitches apart.Make the smile on round 26 with 2 stitches wide using double strand of Ruby yarn #7386 .Embroider the nose with Amigurumi yarn color #7563 (Chantilly)  between rounds 28 and 29, 2 stitches wide.Apply blush to the cheeks (if desired).Embroider the hair with Amigurumi yarn color #7625 (Chestnut) on rounds 32 to 34. Arms (2) and Legs (2) Using Amigurumi Glow yarn 1 - 6 sc. inside of magic ring; 2 - 6 inc. = 12 sc. Note: pm. on first sc.; 3 to 7 (5 rounds) - 12 sc. Fasten off, leaving a yarn tail for sewing. Sew onto the body. Before you finish sewing, add some stuffing.   Bigger bandages for the head Using Amigurumi Glow yarn Go up 5 ch. 1 - Skip 3 ch. (count as 1 dc.), 2 dc. = 3 dc.;Work in back-and-forth rows, turning the work at the end of each row. 2 to 62 (61 rounds) - 2 ch. (count as 1 dc.), 2 dc. = 3 dc. Fasten off.   Smaller bandages for the head (2) Using Amigurumi Glow yarn Go up 5 ch. 1 - Skip 3 ch. (count as 1 dc.), 2 dc. = 3 dc.;Work in back-and-forth rows, turning the work at the end of each row. 2 to 25 (24 rounds) - 2 ch. (count as 1 dc.), 2 dc. = 3 dc. Fasten off. Wrap the bandages around the head and pin in place, leaving the face uncovered. Sew or glue with Craft Glue. Note:  the size and quantity of bandages depends on the position you choose to wrap them around the head. Therefore, you may need more or fewer rounds.   Bandages for the body Using Amigurumi Glow yarn Go up 5 ch. 1 - Skip 3 ch. (count as 1 dc.), 2 dc. = 3 dc.;Work in back-and-forth rows, turning the work at the end of each row. 2 to 82 (81 rounds) - 2 ch. (count as 1 dc.), 2 dc. = 3 dc. Fasten off. Wrap the bandages around the body and pin to set the position. Sew or glue with Craft Glue.   Bandages for the arms and legs (4) Using Amigurumi Glow yarn Go up 5 ch. 1 - Skip 3 ch. (count as 1 dc.), 2 dc. = 3 dc.;Work in back-and-forth rows, turning the work at the end of each row. 2 to 14 (13 rounds) - 2 ch. (count as 1 dc), 2 dc. = 3 dc. Fasten off. Wrap the bandages around the arms/legs and pin to set the position. Sew or glue with Craft Glue.   Designer: Juliana Penhorate (@amigujumi) Pattern review by: Patty Wolf Traduction: FuriFuri Amigurumi Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

10/26/2024 Level of difficulty MATERIALS 2 Premium T-Shirt yarn rolls of each color – Colors: #8001 (White) and #4222 (Orange Peel) 1 Premium T-Shirt yarn roll of each color – Colors: #8990 (Black) and #7288 (Cocoa) Crochet hook 7.0 mm   Stitch Glossary and Abbreviations: st. (Stitch), sts. (Stitches), ch. (Chain), rnd. (Round);  BLsc (single crochet in the back loop). Approximate size: 17.3” x 11.8” each Gauge: A 4” square made in BLsc with Premium T-Shirt yarn and a 7 mm hook, measures 9 sts x 9 rows. Execution: The Placemat uses the tapestry crochet technique; in this technique, work with 2 or more strands in the same round, changing colors according to what the chart specifies. To change colors, pull the last 2 loops off the hook with the new color, and hide the other yarn over the previous round, between the stitches of the new color.   With White yarn, start with 28 ch. + 1 ch. to turn the work (do not count the initial ch. as a st., it’s only to used to go up the rows). 1 - Start in the 2nd ch. from the hook, 28 BLsc. 2 - Start with 1 ch., 28 BLsc 3 - Join the Orange Peel yarn and extend it over the base row, with White yarn start with 1 ch., 8 BLsc, change to Orange Peel yarn, 8 BLsc., change to White yarn, 12 BLsc. Continue following the chart, working in back-and-forth rows, making the appropriate color changes. Fasten off the yarns.   Make 2 identical pieces.   Designer: Círculo Studio Traduction: FuriFuri Amigurumi Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

10/28/2024 Level of difficulty MATERIALS 2 Premium T-shirt yarn roll – Colors: #4222 (Orange Peel) 1 Premium T-shirt yarn roll – Color: #8990 (Black) Crochet Hook 8.0 mm Synthetic Leather, 4” long x 1” wide.   Stitch Glossary and Abbreviations: st. (Stitch), sts. (Stitches), ch. (Chain) , sl st. (Slip Stitch), rnd. (Round); sc. (Single Crochet), ws st. (Waistcoat Stitch), inc. (Increase of 2 sc. in the same stitch), pm. (Place Marker), Magic Ring, Invisible Fasten off (remove the loop from the hook and insert it into the starting stitch of the round. Pull the loop and take it off the hook; set it aside for the next step. Insert the hook into the middle of the stitch that formed, yarn over and pull it forward, then insert the hook into the reserved loop, yarn over, and pull both loops off at once.). Approximate size: 7” height x 7.9” diameter. Execution:   Chart 1 - Bottom With the Orange Peel yarn, start with a magic ring. Work in spiral crochet, closing each rnd. with an invisible fasten off. 1 - 7 ws st. inside of magic ring 2 - 7 inc. (14) Note: pm. on first. st. 3 - (1 ws st., 1 inc.) x7 (21) 4 - (2 ws st., 1 inc.) x7 (28) 5 - (3 ws st., 1 inc.) x7 (35) 6 - (4 ws st., 1 inc.) x7 (42) 7 - (5 ws st., 1 inc.) x7 (49) 8 - (6 ws st., 1 inc.) x7 (56) 9 - 56 ws st. 10 - Work on the reverse side: 56 sl st. Set the yarn aside.   Chart 2 - Lateral   The basket lateral uses the tapestry crochet technique; in this technique, work with 2 or more strands in the same round, changing colors according to what the chart specifies. To change colors, pull the last 2 loops off the hook with the new color, and hide the other yarn over the previous round, between the stitches of the new color.   Continue with the Orange Peel yarn from chart 1, work in spiral crochet, closing each rnd. with an invisible fasten off. 1 - Work by taking the sl sts from the last round of the bottom part: 56 ws st. 2 - 56 ws st. 2 - Join the Black yarn and extend over the base round. Work 27 ws st. with Orange Peel yarn, change to Black yarn, 3 ws st., change to Orange Peel yarn, 26 ws st.Continue following chart 2, working in circular rows, making the appropriate color changes. Fasten off the Black yarn and reserve the Orange Peel yarn.   Chart 3 - Finishing Continue with the Orange Peel yarn from chart 2. 1 - 56 sl st. Fasten off.   Chart 4 - Lid With the Orange Peel yarn, start with a magic ring. Work in spiral crochet, closing each rnd. with an invisible fasten off. 1 – 7 ws. st inside of magic ring 2 - 7 inc. (14) Note: pm. on first st. 3 - (1 ws st., 1 inc.) x7 (21) 4 - (2 ws st., 1 inc.) x7 (28) 5 - (3 ws st., 1 inc.) x7 (35) 6 - (4 ws st., 1 inc.) x7 (42) 7 - (5 ws st., 1 inc.) x7 (49) 8 - (6 ws st., 1 inc.) x7 (56) 9 - 56 sl st. Fasten off.   Fold the synthetic leather in half, pass it through the center of the lid from top to bottom, forming a handle at the top and leaving about 0.8” to glue the leather to the back of the lid.   Designer: Círculo Studio Traduction: FuriFuri Amigurumi Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

10/27/2024 Level of difficulty MATERIALS 1 Premium T-shirt yarn roll – Color: #4222 (Orange Peel) 1 Harmony ball – Colors: #5259 ( Amazônia ) and #5454 ( Faia ) *Não achei as cores no site 1 Amigurumi ball – Color: #8990 (Black) 1 Cléa ball – Color: #8990 (Black) Crochet Hook 7.0mm Fabric Glue Square MDF Base with holes – Size: 4 x 4 inches1 Round Black Button with a diameter of 0.6 inches.   Stitch Glossary and Abbreviations: st. (Stitch), sts. (Stitches), ch. (Chain) , sl st. (Slip Stitch), rnd. (Round); sc. (Single Crochet), ws st. (Waistcoat Stitch), inc. (Increase of 2 sc. in the same stitch), FPsl st. (Front Post Slip Stitch), hdc. (Half Double Crochet), dc. (Double Crochet), Magic Ring, Invisible Fasten off (remove the loop from the hook and insert it into the starting stitch of the round. Pull the loop and take it off the hook; set it aside for the next step. Insert the hook into the middle of the stitch that formed, yarn over and pull it forward, then insert the hook into the reserved loop, yarn over, and pull both loops off at once.). Approximate size: 3.5 inches in height x 4.7 inches in width. Execution:   Chart 1 - Lateral Use the Orange Peel yarn. 1 - Fill the MDF base with: on the side with 1 sc. for each hole in the MDF base, in the corner work 2 sc. in the same hole in the MDF base . Repeat from to going all the way around the MDF base.  Make an invisible fasten off. 2 - Work with 1 FPsl st. in each base stitch. 3 - Work with 1 sc. in each base stitch, make an invisible fasten off. 4 to 11 - Work 1 ws st. in each base stitch. 12 - Work 1 sl st. in each base stitch. Make an invisible fasten off. Glue the button on and embroider the eye and mouth with black Cléa yarn, following the assembly diagram.   Chart 2 – Leaf Stem With the Faia yarn, start with a magic ring, 1 - 5 sc. inside the magic ring. 2 - 5 sc. Fasten off the yarn. Sew onto the last row of the basket. Follow the assembly diagram.   Chart 3 - Leaf With the Amazonia yarn, start with 5 ch. + 3 ch. to turn the work. 1 - Go back and work in the 4th chain from the hook: 3 sc., 1 hdc., 4 sc. together in the last chain, on the other side of the foundation chains: 1 hdc., 3 dc., 2 ch., 1 sl st. in the same chain as the previous dc. Fasten off. Make 2 equal leaves and sew on the last row of the basket, following the assembly diagram.   Chart 4 - Nose Use the Black Amigurumi yarn, start with a magic ring and work in back-and-forth rows. 1 - Start with 1 ch., 1 sc. 2 - 1 inc. (2) 3 - 2 inc. (4) Reserve the yarn.   Chart 5 – Nose Contouring Work aound the entire nose with 1 sl st. for each base stitch. Fasten off the yarn.Glue the nose to the basket following the assembly diagram.   Designer: Círculo Studio Traduction: FuriFuri Amigurumi Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

10/26/2024 Level of difficulty MATERIALS Círculo yarns – Natural Cotton Maxcolor 4/6 3 balls (7 oz) – Color: #8990 (Black) 1 ball (7 oz) in each color – Colors: #8001 (White) and #4131 (Dark-Cheddar) Crochet Hook 3.5 mm   Stitch Glossary and Abbreviations: st. (Stitch), sts. (Stitches), mk. (Make), ch. (Chain), rnd. (Round); BLsc (Back Loop single crochet). Approximate size: 32” x 19” Gauge: A 4” square made in BLsc., with Natural Cotton Maxcolor 4/6 and a 3.5 mm hook, measures 15 sts. x 17 rows. Execution:   The Carpet uses the tapestry crochet technique; in this technique, work with 2 or more strands in the same round, changing colors according to what the chart specifies. To change colors, pull the last 2 loops off the hook with the new color, and hide the other yarn over the previous round, between the stitches of the new color.   With the Black yarn, start with 77 ch. + 1 ch. to turn the work (do not count the starting ch. as a stitch, it is only used to go up the rows). 1 - Go back and, in the second ch. from the hook, make 77 Blsc. 2 to 30 - Start with 1 ch., 77 BLsc. 31 - Join the White yarn and extend it over the base round. With the Black yarn, start with 1 ch.,11 BLsc., change to White yarn, 2 BLsc., change to Black yarn, 45 BLsc., change to White yarn, 2 BLsc., change to Black yarn, 17 BLsc. Continue following the chart, working in back-and-forth rows, making the necessary color changes. Fasten off the yarns.   sides.   Designer: Círculo Studio Traduction: FuriFuri Amigurumi Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

10/24/2024 Level of difficulty MATERIALS 3 Natural Cotton Maxcolor 4/6 (7 oz) balls – Color: #8001 (White) 1 Natural Cotton Maxcolor 4/6 (7 oz) balls in each color – Colors: #8990 (Black), #6394 (Lavender) and #4131 (Dark Cheddar) 1 Duna ball – Color: #8323 (Onyx Grey) Crochet Hook 3.5 mm   Stitch Glossary and Abbreviations: st. (Stitch), sts. (Stitches), mk. (Make), ch. (Chain), rnd. (Round); sc. (Single Crochet).; sl st. (Slip Stitch). Approximate size: 19.7” x 19.7” Gauge: A 4” square made in sc., with Natural Cotton Maxcolor 4/6 and a 3.5 mm hook, measures 15 sts. x 17 rows. Execution:   The Pillow uses the tapestry crochet technique; in this technique, work with 2 or more strands in the same round, changing colors according to what the chart specifies. To change colors, pull the last 2 loops off the hook with the new color, and hide the other yarn over the previous round, between the stitches of the new color.   Chart 1 – Front part With the White yarn, start with 69 ch. + 1 ch, to turn the work. 1 - Start working in the 2nd ch. from the hook, make 69 sc. 2 to 7 - Start with 1ch., 69 sc. Fasten off. 8 to 12 - Join the Dark Cheddar yarn, start with 1ch., 69 sc. Fasten off. 13 &14 - Join the White yarn, start with 1ch., 69 sc. Fasten off. 15 - Join the Lavender and Black yarns. Extend the Black yarn over the base row, with the Lavender yarn, start with 1 ch., 26 sc., change to the Black yarn, 15 sc., change to the Lavender yarn, 28 sc.Continue following chart 1, working in back-and-forth rows, making the necessary color changes.Fasten off the Black, Lavender, and Dark Cheddar yarns, set the White yarn aside. With the Onyx Gray yarn, embroider the spider web following chart 1.   Chart 2 – Back part Continue with the White yarn from chart 1. 1 to 7 - Start with 1ch., 69 sc. Fasten off. 8 to 12 - Join the Dark Cheddar yarn, start with 1ch., 69 sc. Fasten off. Continue following chart 2, working in back-and-forth rows, making the necessary color changes.Fasten off the Black, Lavender, and Dark Cheddar yarns; Set the White yarn aside.   Chart 3 - Join Continue with the White yarn from chart 2.Fold the piece in half and work, joining the front part with the back part.1 - Start in the corner with 2 sc. in the same base stitch, yarn over the stitch from the front and the stitch from the back together, work along the side with 1 sc. for each base stitch, yarning over the stitch from the front and the stitch from the back together .  Repeat from to around the entire piece, joining the sides. Close with a sl st. Set the yarn aside.   Chart 4 - Contouring Continue with the white yarn from chart 3.1 - Work around the sides and bottom with 1 sc. for each base stitch. Set the yarn aside.   Chart 5 - Finishing Continue with the White yarn from Chart 4.1 - Work around the opening of the piece with: 1 sc., 2 ch., skip 2 sts. of the base. Repeat from to around the entire opening of the piece. Close with a sl st.Set the yarn aside.In the corner, make a cord with 100 ch. Fasten off.Join the yarn on the opposite side and make a cord with 100 ch. Fasten off.Weave the ch. cords into the finishing loops to close the piece.   Designer: Círculo Studio Traduction: FuriFuri Amigurumi Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...