Search Results

How about decorating your child’s room with handmade pieces? Surprise your cuties with pieces made with much love specially for them. In this e-book, you will find 8 exclusive crochet patterns to set up a perfect kids room and still have access to some very useful tips for organizing a safe and comfortable environment for children during happy moments. eBook Here Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/14/2024 Level of difficulty Approximate size: 7.5 inches   Materials: 1 Amigurumi yarn ball – Colors: #8001 (White) & #8990 (Black); 1 Amigurumi Sparkle yarn ball – Colors: #5767 (Brazilian Green), #3528 (Carmine) & #8121 (Snowflake); Amigurumi yarn scraps – Color: #7567 (Cocoa); Circular knitting needle – 3.5 mm; Crochet hook – 3.0 mm; Polyester stuffing; Tapestry needle; Fabric glue or craft glue; Stitch marker.   Stitch Glossary & Abbreviations: - Crochet: Increase = inc.; Triple Increase = incT.; Chain = ch.; Decrease = dec.; Slip Stitch = sl st.; Single Crochet = sc.; Back Loops Only = BLO; End of Round = eor; Place Marker = pm.   - Knitting: Knit Stitch = k.; Purl Stitch = p.; Yarn Over = yo.; Round = rnd.;Knit Two Together = k2tog.;Purl Two Together = p2tog.;Left-Leaning Increase (make an increase by lifting the horizontal strand between 2 stitches and inserting the needle from back to front) = LLI;Right-Leaning Increase (make an increase by lifting the horizontal strand between 2 stitches and inserting the needle from front to back) = RLI.;   Double Stitch for German Short Rows. (Purl rows: slip the first stitch purlwise, bring the yarn to the back of the work, and pull it up until two stitches are formed on the needle, return the yarn to the front, and continue the row in purl) = DSP (purl rows); Double Stitch for German Short Rows. (Knit rows: slip the first stitch knitwise, bring the yarn to the front of the work, and pull it up until two stitches are formed on the needle, return the yarn to the back, and continue the row in knit) = DSK (knit rows);   Knit Increase in the Same Base Stitch/Knit Front and Back (knit one stitch through the front loop without dropping it, then knit one stitch through the back loop) = KFB; Left-Leaning Decrease/Slip Slip Knit (slip two stitches knitwise, one at a time, to the right-hand needle. Return the stitches to the left-hand needle and knit them together through the back loop) = SSK Knit Bind-Off = knit two stitches, pass the first stitch over the second, leaving only one stitch on the right-hand needle; Purl Bind-Off = purl two stitches, pass the first stitch over the second, leaving only one stitch on the right-hand needle.   Instructions Paw Reinforcement (4) With the Amigurumi yarn #8990 (Black) 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Fasten off with sl st. Make 3 more reinforcements just like the first one.   Paws (4) & Legs (4) Start with the Amigurumi yarn #8990 (Black) 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 3 sc., 1 inc. to eor = 15 sc.; 4- BLO: 15 sl st.; 5- 15 sc.Glue the paw reinforcement. Change to the Amigurumi yarn #8001 (White) 6- 15 sc.; 7- 3 sc., 1 dec. to eor = 12 sc.; 8 to 10 (3 rounds): 12 sc.; 11- 3 sc., 1 inc. to eor = 15 sc.; 12- 3 sc., 1 dec. to eor = 12 sc.; 13-.1 inc., 10 sc., 1 inc. = 14 sc.; 14-.1 sc., 1 inc., 11 sc., 1 inc. = 16 sc.; 15- 1 sc., 1 inc., 13 sc., 1 inc. = 18 sc. Fasten off with sl st. Fasten off the first leg. Make the second leg up to the 14th rnd. and don’t cut the yarn. In the next rnd., join the legs, continuing from the second leg: 16-: 1 sc., 1 inc., 1 sc., 2 sc joining the two front legs (insert the hook from the inside to the outside of the 1st leg, joining it with the next stitch of the 2nd leg, and crochet them together) , 10 sc., 1 inc. = 18 sc. Fasten off with sl st. Stuff firmly.Crochet the hind legs identical to the front legs, including the joining of the two.   Belly With the Amigurumi yarn #8001 (White) Chain 6, skip the 1st one. 1-1 inc., 3 sc., 1 incT. in the last ch., on the other side of the foundation ch.: 3 sc., 1 sc. in the last ch. = 12 sc.; 2- 1 sc., 1 inc., 3 sc., 1 inc., 1 sc., 1 inc., 3 sc., 1 inc. = 16 sc.; 3- 1 incT., 1 sc., 1 inc., 4 sc., 1 inc., 1 incT., 1 sc., 1 inc., 4 sc., 1 inc. = 24 sc.Don’t cut the yarn. Move on to the body.   Body Continue with the Amigurumi yarn #8001 (White) Continue from the belly.Join the four legs to the belly.Sew the stitches at both ends of the belly to the legs, with the side of the increases facing inward towards the belly.Attach the yarn to the stitch at the join of the legs, crochet the first stitch of the 1st rnd. into the first stitch of the left leg, and place a marker to mark the beginning of the round.1- 12 sc. in the left hind leg, 6 sc. in the belly, 12 sc. in the right front leg, 12 sc. in the left front leg, 6 sc. in the belly, 12 sc. in the right hind leg = 60 sc. 2- 60 sc.; 3- 3 sc., 2 inc., 25 sc., 1 incT., 24 sc., 2 inc., 3 sc. = 66 sc.; 4 to 7 (4 rounds): 66 sc.; 8- 2 sc., (1 dec., 1 sc.) 2x, 1 dec., 46 sc., (1 dec., 1 sc.) 2x, 1 dec., 2 sc. = 60 sc.; 9- (1 sc., 1 dec.) 3x, 7 sc., 1 dec., 1 sc., 1 dec., 18 sc., 1 dec., 1 sc., 1 dec., 7 sc., (1 dec., 1 sc.) 3x = 50 sc.; 10- 1 sc., 3 dec., 5 sc., 1 dec., 1 sc., 2 dec., 12 sc., 2 dec., 1 sc., 1 dec., 5 sc., 3 dec., 1 sc. = 38 sc. Separate the back from the neck. 11- 2 sc., 1 dec., 1 sc., 1 dec., 2 sc., 1 dec., 1 sc., 4 ch., skip 16 base sts., 1 sc. in the next st., 1 dec., 2 sc., 1 dec., 1 sc., 1 dec. = 20 stitches; Stuff the body. Continue crocheting the back. 12- 2 sc., 1 dec., 3 sc., 1 dec., 4 sc. in the ch., 1 dec., 3 sc., 1 dec. = 16 sc.; 13- 1 dec., 2 sc., (1 dec., 3 sc.) 2x, 1 dec. = 12 sc.; 14- 6 dec. = 6 sc. Fasten off, leaving a yarn tail for sewing of approximately 8 inches.Stuff the back. Close with a reverse magic ring.   Neck & Head With the Amigurumi yarn #8001 (White) Attach the yarn to the first ch. on the right side of the back. 1- 18 sc. in the body, 1 sc. between the last st. of the body and the first ch., 4 sc. in the ch., 1 sc. between the last ch. and the first st. made in this round = 24 sc.; 2- 18 sc., 3 dec. = 21 sc.; 3- 1 dec., 15 sc., 2 dec. = 18 sc.; 4 to 8 (5 rounds)- 18 sc.; 9- (1 sc., 1 inc.) 3x, 7 sc., (1 inc., 1 sc.) 2x, 1 inc. = 24 sc.; 10 to 12 (3 rounds)- 24 sc.; 13- 2 sc., 1 dec. to eor = 18 sc. Stuff the neck. 14- 1 sc., 1 dec. to eor = 12 sc.; 15- 6 dec. = 6 sc. Fasten off, leaving a yarn tail for sewing of approximately 8 inches. Finish stuffing. Close with a reverse magic ring.   Ears (2) With the Amigurumi yarn #8001 (White) 1- 5 sc. inside of a magic ring; 2- 5 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc., 2 sc., 1 inc. = 7 sc.; 4- 2 sc., 1 inc., 3 sc., 1 inc. = 9 sc.; 5- 3 sc., 1 inc., 4 sc., 1 inc. = 11 sc.; 6- 4 sc., 1 inc., 5 sc., 1 inc. = 13 sc.; 7 to 9 (3 rounds)- 13 sc.; 10- 4 sc., 1 dec., 5 sc., 1 dec. = 11 sc.; 11- 3 sc., 1 dec., 4 sc., 1 dec. = 9 sc. Fasten off with a sl st., leaving approximately 10 inches of yarn for sewing.Fold the ear and sew it to the top of the head.   Snout With the Amigurumi yarn #8001 (White) 1- 4 sc. inside of a magic ring; 2- 4 inc. = 8 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 12 sc.; 4 & 5- 12 sc. Fasten off with a sl st., leaving approximately 10 inches of yarn for sewing. Sew the snout to the front of the head, starting at the neck on the 8th rnd. and going around to the 12th rnd. of the head.Add stuffing when there are 3 stitches left to finish sewing.   Tail With the Amigurumi yarn #8001 (White) Cut 10 strands of yarn, each measuring 6 inches long, fold them in half, and tie them on the 7th, 8th, and 9th rnd. of the body, between the legs.   Mane With the Amigurumi yarn #8001 (White) Cut 12 strands of yarn of 4 inches long each, fold them in half and tie them starting between the ears, going down to the neck for 3 more rounds.   Forelock With the Amigurumi yarn #8001 (White) Cut 6 strands of 4 inches long each, fold them in half and tie them between the ears.   Trim the yarn from the tail, mane and forelock. With the  Amigurumi yarn #8990 (Black),  embroider the eyes mouth and nostrils. With the  Amigurumi yarn #7567 (Cocoa), embroider the noseband.     Clothes   The accessories are knitted in circular knitting without seams, using the 3.5 mm circular needle. Therefore, use the magic loop cast-on technique throughout the work.   Hat Start with the Amigurumi Sparkle yarn #8121 (Snowflake) Cast-on 6 stitches using the 'Magic Loop Cast-On' technique: create the magic loop, use a crochet hook to pull a loop through the magic ring, and pull the working yarn through to form each stitch.Cast-on the magic loop, dividing half of the stitches onto each needle.Pull the magic loop tight.Cast-on the magic loop, leaving half of the stitches on each needle. 1- k6; 2- (k1., 1 RLI.) 6x = 12 k. sts.; 3- k12; 4- (k2., 1 RLI.) 6x = 18 k. sts.; 5 to 7 (3 rounds)- 18 k sts..; 8- (k1., 1 RLI.) 6x = 12 k sts.; 9- 12 k.; 10- 6 SSK. = 6 k sts.. Change to the Amigurumi Sparkle yarn #3528 (Carmine) 11 to 13 (3 rounds)- k6.; 14- (k1, 1 RLI.) 6x = 12 k. sts.; 15 to 17 (3 rounds)- k12; 18- (k2, 1 RLI.) 6x = 18 k. sts.; 19 to 21 (3 rounds)- k18.; 22- (k3, 1 RLI.) 6x = 24 k. sts.; 23 to 25 (3 rounds)- k24; 26- (k4, 1 RLI.) 6x = 30 k. sts.; 27 to 29 (3 rounds)- k30;   30- k2, bind off 4 sts. in k. (leaving 1 k. st. remaining), k2, bind off 4 sts. in k. (leaving 1 k. st. remaining), k16 = 22 k. sts.31- k2, cast on 4 sts. onto the right-hand needle, k3, cast on 4 sts. onto the right-hand needle, k17 = 30 k. sts.   Join the Amigurumi Sparkle yarn #8121 (Snowflake)  and work using the Mosaic  technique, alternating colors for each round as follows:31- repeat: (k1, slip the next stitch purlwise) to the end of the round = 30 sts. Change to the Amigurumi Sparkle yarn #3528 (Carmine) 32- repeat: (slip 1 stitch purlwise with the yarn in the back, bring the yarn to the front, and purl 1) to the end of the round = 30 sts.Repeat rounds 31 and 32 four more times, totaling 10 rounds. Cut the Amigurumi Sparkle yarn #3528 (Carmine),  leaving a tail for finishing. Bind-off all stitches in knit with the Amigurumi Sparkle yarn #8121 (Snowflake). Cut the yarn and weave in the ends into the fabric of the hat.   Poncho With the Amigurumi Sparkle yarn #3528 (Carmine) Cast on 30 stitches.Work in straight knitting, meaning back-and-forth rows.Start on the wrong side. 1- p30; 2- k30; 3- p30; 4- k30. Without cutting the Amigurumi Sparkle yarn #3528 (Carmine), join the Amigurumi Sparkle yarn #8121 (Snowflake) 5- p1 with the  Amigurumi Sparkle yarn #3528 (Carmine),  p1 with the Amigurumi Sparkle yarn #8121 (Snowflake)  to the end of round = 30 p. sts. 6- k1 with the  Amigurumi Sparkle yarn #3528 (Carmine),  k1 with the Amigurumi Sparkle yarn #8121 (Snowflake) to the end of round   = 30 k. sts. Without cutting the Amigurumi Sparkle yarn #3528 (Carmine), continue with the Amigurumi Sparkle yarn #8121 (Snowflake) 7- p30; 8- k30. On the next row, divide the work to create a space for the tail to pass through.Once again, work with both colors over the 14 stitches on each side of the piece, naming the left side A and the right side B of the blanket. 9- A: knit 14 stitches alternating the colors: p1 with the Amigurumi Sparkle yarn #3528 (Carmine) , p1 with the Amigurumi Sparkle yarn #8121 (Snowflake),  bind off 2 stitches, finish the round alternating the colors: p1 with the  Amigurumi Sparkle yarn #3528 (Carmine) , p1 with the Amigurumi Sparkle yarn #8121 (Snowflake); 10- (A): k1 with the  Amigurumi Sparkle yarn #3528 (Carmine) , k1 with the Amigurumi Sparkle yarn #8121 (Snowflake) = 14 sts. Without cutting the Amigurumi Sparkle yarn #8121 (Snowflake), continue with the Amigurumi Sparkle yarn #3528 (Carmine) 11- (A): p14; 12- (A): k14. Without cutting the Amigurumi Sparkle yarn #3528 (Carmine), continue with the Amigurumi Sparkle yarn #8121 (Snowflake) 13- (A): (p2tog.) 7x = 7 p.; 14- (A): k7. Change to the Amigurumi Sparkle yarn #3528 (Carmine) 15- (A): (p2tog.) 3x, p1. = 4 p.; 16- (A): k4. Cut both yarns and attach them to the 1st stitch after the bind-off of 2 stitches from the 9th rnd., to knit the stitches left on the needle after dividing the work. 10- (B): p1 with the  Amigurumi Sparkle yarn #3528 (Carmine),  p1 with the Amigurumi Sparkle yarn #8121 (Snowflake) = 14 p. sts. Continue with the Amigurumi Sparkle yarn #3528 (Carmine) 11- (B): p14; 12- (B): k14. Without Amigurumi Sparkle yarn #3528 (Carmine), continue with the Amigurumi Sparkle yarn #8121 (Snowflake) 13- (B): (p2tog.) 7x = 7 p.; 14- (B): k7. Change to the Amigurumi Sparkle yarn #3528 (Carmine) 15- (B): (p2tog.) 3x, p1. = 4 p.; 16- (B): k4. Change to the Amigurumi Sparkle yarn #8121 (Snowflake) Cut the Amigurumi Sparkle yarn #3528 (Carmine). 17- p4, k4 (on the other side of the opening created for the tail), p4, pick up 15 k sts. along the side of the work as follows: turn the work to the RS., hold the needle with the sts. in your left hand, and pick up sts. from left to right until you reach the cast-on edge. = 23 sts.;18- sl1 pwise, k22, pick up 15 sts. along the side of the work, starting from the needle up to the initial cast-on edge = 38 sts.;19- sl1 pwise, p37. On the next round, join the  Amigurumi Sparkle yarn #5767 (Brazilian Green) and continue working with the Amigurumi Sparkle yarn #8121 (Snowflake). 20- sl1 pwise, k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake) , k1 with the   Amigurumi Sparkle yarn #5767 (Brazilian Green)  until the end of round = 37 k. sts.; 21- sl1 pwise, p1 with the  Amigurumi Sparkle yarn #8121 (Snowflake) , p1 with the   Amigurumi Sparkle yarn #5767 (Brazilian Green), until the end of round = 37 p. sts..; 22- sl1 pwise, k36 = 37 sts.;23- sl1 pwise, p36 = 37 sts.;24- cast on 8 sts., k37, cast on 8 sts. = 53 sts.; 25- k8 with the  Amigurumi Sparkle yarn #5767 (Brazilian Green) , (k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake) , k1 with the  Amigurumi Sparkle yarn #5767 (Brazilian Green) ) 18x, k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake) , k8 with the  Amigurumi Sparkle yarn #5767 (Brazilian Green)  = 53 k. sts.; 26- p8 with the  Amigurumi Sparkle yarn #5767 (Brazilian Green) , (p1   with the  Amigurumi Sparkle yarn #5767 (Brazilian Green) , p1 with the  Amigurumi Sparkle yarn #8121 (Snowflake))  18x, p1 with the  Amigurumi Sparkle yarn #5767 (Brazilian Green) , p8 with the  Amigurumi Sparkle yarn #5767 (Brazilian Green)  = 53 p. sts.; 27- Bind off 8 sts. in k. using the  Amigurumi Sparkle yarn #5767 (Brazilian Green) , (k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake) , k1 with the   Amigurumi Sparkle yarn #5767 (Brazilian Green) )   18x, k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake) , k8 with the  Amigurumi Sparkle yarn #5767 (Brazilian Green)  = 45 k. sts.; 28- Bind off 8 sts. in p. using the  Amigurumi Sparkle yarn #5767 (Brazilian Green), cut the  Amigurumi Sparkle yarn #5767 (Brazilian Green) and work p37 with the  Amigurumi Sparkle yarn #8121 (Snowflake) = 37 stitches. Without cutting the Amigurumi Sparkle yarn #8121 (Snowflake), continue with the Amigurumi Sparkle yarn #3528 (Carmine) Next, work short rows: 1- k11 (TURN); 2- 1 DSK, p10 (TURN); 3- k9 (TURN); 4- 1 DSK, p8 (TURN); 5- k7 (TURN); 6- 1 DSK, p6 (TURN); 7- k5 (TURN); 8- 1 DSK, p4 (TURN); 29- k4, (k2tog, k1) 3x, k2tog, k26 = 37 sts. Next, work short rows: 1- p11 (TURN); 2- 1 DSP, k10 (TURN); 3- p9 (TURN); 4- 1 DSP, k8 (TURN); 5- p7 (TURN); 6- 1 DSP, k6 (TURN); 7- p5 (TURN); 8- 1 DSK, p4 (TURN); 30- p4, (ssp, p1) 3x, ssp, p26 = 37 sts. Without cutting the Amigurumi Sparkle yarn #3528 (Carmine), join the Amigurumi Sparkle yarn #8121 (Snowflake) Next, work in circular knitting, that is, in rounds. 1- (k1 with the  Amigurumi Sparkle yarn #3528 (Carmine),  k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake))  6x, k2tog. with the  Amigurumi Sparkle yarn #3528 (Carmine) , k2tog. with the  Amigurumi Sparkle yarn #8121 (Snowflake) , k2tog. with the  Amigurumi Sparkle yarn #3528 (Carmine), k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake),  k2tog. with the Amigurumi Sparkle yarn #3528 (Carmine),  k2tog. with the  Amigurumi Sparkle yarn #8121 (Snowflake) , k2tog. with the  Amigurumi Sparkle yarn #3528 (Carmine),  (k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake), k1 with the  Amigurumi Sparkle yarn #3528 (Carmine))  6x = 31 stitches; 2- (k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake), k1 with the  Amigurumi Sparkle yarn #3528 (Carmine))  15x, k1 with the  Amigurumi Sparkle yarn #3528 (Carmine)  = 31 stitches; 3- (k1 with the Amigurumi Sparkle yarn #3528 (Carmine),  k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake) ) 15x, k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake) = 31 stitches; 4- (k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake), k1 with the  Amigurumi Sparkle yarn #3528 (Carmine) )   15x, k1 with the  Amigurumi Sparkle yarn #3528 (Carmine)  = 31 stitches; 5- (k1 with the  Amigurumi Sparkle yarn #3528 (Carmine), k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake) ) 15x, k1 with the  Amigurumi Sparkle yarn #8121 (Snowflake) = 31 stitches.   Cut the Amigurumi Sparkle yarn #8121 (Snowflake). Bind-off the stitches in knit with the  Amigurumi Sparkle yarn #3528 (Carmine). Sew a small button onto the green flap that will be on the donkey's belly.   Scarf Start with the Amigurumi Sparkle yarn #8121 (Snowflake) Cast-on 60 stitches.Work in flat knitting, that is: back-and-forth rows.All rows will be in knit stitch. 1 to 4 (4 rounds)- k60. (TURN). Change to the Amigurumi Sparkle yarn #3528 (Carmine) 5 to 8 (4 rounds)- k60. (TURN). Change to the Amigurumi Sparkle yarn #5767 (Brazilian Green) 9 to12 (4 rounds)- k60. (TURN). Change to the Amigurumi Sparkle yarn #8121 (Snowflake) Bind-off all stitches in knit.Add fringes to both ends.   Created by: Suely Beggiato (@duasarteiras) Pattern review by: Patty Wolf Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/09/2024 Level of difficulty SIZES Using Círculo Amigurumi yarn, 2 mm crochet hook, and X single crochet: ·         Candy Cane: 5.5 cm. ·         Lollipop: 5 cm. ·         Reindeer: 9 cm. ·         Boot (2.75 mm crochet hook): 8 cm. ·         Reindeer + Boot Set: 14 cm. Using Círculo Amigurumi Slim yarn, 1.5 mm crochet hook, and X single crochet: ·         Candy Cane: 4.5 cm. ·         Lollipop: 4 cm. ·         Reindeer: 7.5 cm. ·         Boot (2.2 mm crochet hook): 6.5 cm. ·         Reindeer + Boot Set: 11 cm. MATERIALS AND TOOLS GENERAL MATERIALS AND TOOLS : ·         Crochet hooks: o   For Amigurumi yarn: 2 mm and 2.75 mm. o   For Amigurumi Slim yarn: 1.5 mm and 2.2 mm. ·         Embroidery needles (Tapestry no. 22, Crewel no. 7 and 9, and Milliner no. 7). ·         Stitch markers. ·         Sewing pins. ·         Scissor. ·         Universal plier. ·         Gold cord (for ornament hangers - optional).   FOR LOLLIPOP : ·         Círculo Amigurumi or Amigurumi Slim yarn in colors: o   Carmine 3528; o   Dulce de leche 7077; o   Off-white 8176.   FOR CANDY CANE : ·         Círculo Amigurumi or Amigurumi Slim yarn in colors: o   Carmine 3528; o   Off-white 8176. ·         White pipe cleaner (1 unit).   FOR REINDEER : ·         Círculo Amigurumi or Amigurumi Slim yarn in colors: o   Caramel 7076; o   Carmine 3528; o   Craft 7148; o   Eco 5083; o   Macadamia 3148; o   Off-white 8176. ·         Embroidery thread Maxi Mouliné color Black #900 (for face details). ·         6 mm round safety eyes for Amigurumi yarn or 5 mm round safety eyes for Amigurumi Slim yarn (2 units). ·         Fiberfill. ·         Blush (for cheeks - optional). ·         Fabric or silicone glue.   FOR BOOT : ·         Círculo Amigurumi or Amigurumi Slim yarn in colors: o   Carmine 3528; o   Off-white 8176. ·         10 mm gold mini jingle bells (2 units - optional). ·         Embroidery thread Maxi Mouliné color White #100 (for boot details - optional).   ABBREVIATIONS (US Terms) ·         Rnd(s): round(s). ·         St: stitch(es). ·         Ch: chain stitch. ·         Slst: slip stitch crochet. ·         Sc: single crochet. ·         Inc: single crochet increase (two sc into the same stitch). ·         Dec: single crochet decrease (two sc closed together). ·         Hdc: half double crochet. ·         Hdc-inc: half double crochet increase (two hdc into the same stitch). ·         Dc: double crochet. ·         [...] x n: repeat the instructions, within brackets, n times. ·         (...): total number of stitches in a round/row. Crocheting Instructions CANDY CANE The candy cane will be worked in a stripe pattern, alternating the yarn colors carmine (#3528) and off-white  (#8176) every two rounds. Start the first round with carmine yarn.   Rnd. 1:  start 6 sc in the magic ring (6). Rnd. 2–22 (21 ROUNDS):  6 sc (6). Note: alternate colors throughout the rounds, always working two rounds in carmine and then two rounds in off-white.   Don’t cut the yarns between changes, leave them on hold until the next color change.   Fasten off, leaving a tail to close the opening later.   To structure the piece, fold a pipe cleaner in half and twist it along the length until it’s firm. If the structure is longer than the piece, trim the excess with a plier. Then, insert the pipe cleaner inside the candy cane. Close the opening by weaving the yarn tail through the front loop of each remaining stitch and pull tight to close. Weave in the yarn end. Shape into a candy cane. If you wish, make a hanging loop for the ornament using a gold cord.   LOLLIPOP CANDY (MAKE 2) Start with carmine  yarn (#3528). Note: when crocheting the candy, don’t tighten the hdc too much. Rnd. 1:  start 6 hdc in the magic ring (6). Tip: place a piece of thread between the first and second stitches of the current round to mark the position. This will help you during the process of making the candy spiral. Rnd. 2:  work this round in the back third loop, 6 hdc-inc (12). Rnd. 3:  work this round in the back third loop, [1 hdc, 1 hdc-inc] x 6 (18). Rnd. 4:  work this round in the back third loop, 1 sc, 1 slst (2). Leave the remaining 16 st unworked. Fasten off, leaving a long sewing tail (approx. 35 cm) on the second piece.   Make the spiral detail of the candy With off-white  yarn (#8176), pull a loop of yarn between the first and second stitches of Rnd. 1 of one piece, inserting the hook from the right to the wrong side of the piece. Reintroduce the hook between the next two stitches and make 1 slst. Repeat this process, making surface slst between the stitches until you reach the first stitch of Rnd. 4. At the end, fasten off and weave in the yarn end. Repeat the process for the second piece.   STICK In dulce de leche  yarn (#7077).   Ch 9. Crochet in rows. Note: the ch at the end of each row does not count to the total stitches count of the row. When crocheting the stick, don’t tighten the slst too much. Row 1:  inserting the hook in the back bump of the second ch from the hook, make 8 slst, ch 1, turn (8). Tip: before making the turning chain, place a stitch marker into both loops of the last stitch of the current row. This will help you locate the loops for the next row. Row 2:  working in both loops of the stitches, make 8 slst, ch 1, turn (8). Tip: at the end of the row, repeat the marker process. Row 3:  working in both loops of the stitches, make 8 slst (8).   Fasten off.   ASSEMBLY 1.    Position the two parts of the candy one on top of the other, with the wrong sides facing inward, aligning the final slst of both pieces. The slst will be the starting point for sewing. 2.    Using the residual carmine yarn and a tapestry needle, sew the pieces together, using only the back loops of the Rnd. 3 and 4 of the candy. 3.    Before closing the seam, insert the stick between the two parts of the candy. Finish sewing to secure the stick and form the lollipop. Make sure there are no open spaces between the candy and the stick. If necessary, reinforce the seam to ensure the stick is firmly attached. 4.    Fasten off the seam and weave in the yarn end. If you wish, make a hanging loop for the ornament using a gold cord.   REINDEER EARS  (MAKE 2) The ears will be worked using the jacquard technique, alternating between the yarn colors caramel (#7076) and macadamia  (#3148). Color changes are indicated within {brackets} throughout the rounds. Inside the brackets is the color, followed by the sequence of stitches to be made with that color.   Rnd. 1:  {caramel} work 4 sc in a magic ring (4). Rnd. 2:  {caramel} 4 inc (8). Rnd. 3:  {caramel} 1 sc, {macadamia} 1 inc , {caramel} [1 sc, 1 inc] x 3 (12). Rnd. 4:  {caramel} 1 sc, {macadamia} 1 sc, 1 inc , {caramel} [2 sc, 1 inc] x 3 (16). Rnd. 5:  {caramel} 1 sc, {macadamia} 3 sc , {caramel} 12 sc (16). Rnd. 6:  {caramel} 8 dec (8).   Fasten off, leaving a long tail for sewing. The ears don’t need to be stuffed.   Flatten the piece, then fold it in half, positioning the macadamia-colored section in the center. Using a tapestry needle, secure the two sides together with a tight stitch.   HORNS  (MAKE 2) PART 1 In craft  yarn (#7148).   Rnd. 1:  start 4 sc in a magic ring (4). Rnd. 2:  4 sc (4). Fasten off.   PART 2 In craft  yarn (#7148).   Rnd. 1:  start 5 sc in a magic ring (5). Rnd. 2–3 (2 ROUNDS):  5 sc (5).   Don't fasten off the second part. In the next round, we'll join the both parts together to form the horn.   Rnd. 4:  join the second part to the first one with 1 sc into the first st of Part 1. Complete the round making sc in next 3 st on the first part. Return to the second part and make 3 sc, 1 dec (8). Rnd. 5:  1 sc, 1 dec, 2 sc, 1 dec, 1 sc (6). Rnd. 6:  6 sc (6).   Fasten off, leaving a long tail for sewing. The horns don’t need to be stuffed.   SNOUT In off-white  yarn (#8176).   Rnd. 1:  work 6 sc in a magic ring (6). Rnd. 2:  1 inc, 1 hdc-inc, 2 inc, 1 hdc-inc, 1 inc (12).   Invisible fasten off, leaving a long tail for sewing.   Embroider the snout Using a Crewel no. 9 embroidery needle and a single strand of black embroidery thread (Maxi Mouliné #900), embroider the snout at the center of the piece.   HEAD In caramel  yarn (#7076). Rnd. 1:  start 6 sc in a magic ring (6). Rnd. 2:  6 inc (12). Rnd. 3:  2 sc, 3 inc, 3 sc, 3 inc, 1 sc (18). Rnd. 4:  2 sc, [1 sc, 1 inc] x 3, 3 sc, [1 sc, 1 inc] x 3, 1 sc (24). Rnd. 5:  2 sc, [1 sc, 1 inc, 1 sc] x 3, 3 sc, [1 sc, 1 inc, 1 sc] x 3, 1 sc (30). Rnd. 6:  4 sc, 1 inc, 6 sc, 1 inc, 7 sc, 1 inc, 6 sc, 1 inc, 3 sc (34). Rnd. 7:  6 sc, 1 inc, 4 sc, 1 inc, 11 sc, 1 inc, 4 sc, 1 inc, 5 sc (38). Rnd. 8–11 (4 ROUNDS):  38 sc (38). Rnd. 12:  7 sc, 6 inc, 13 sc, 6 inc, 6 sc (50). Rnd. 13:  50 sc (50). Rnd. 14:  7 sc, 6 dec, 13 sc, 6 dec, 6 sc (38). Rnd. 15:  3 sc, 1 dec, 10 sc, 1 dec, 5 sc, 1 dec, 10 sc, 1 dec, 2 sc (34).   Insert the safety eyes between Rnd. 11 and 12, centered on the opposite side of the start of the rounds, leaving 7 st between them.   Rnd. 16:  4 sc, [1 dec, 2 sc] x 3, 5 sc, [1 dec, 2 sc] x 3, 1 sc (28). Rnd. 17:  2 sc, [1 dec, 1 sc] x 4, 2 sc, [1 dec, 1 sc] x 4 (20).   Stuff the head firmly with fiber, taking care to shape the cheeks and maintain the elliptical shape of the top, leaving the base (the region that will later connect to the body) slightly flat.   Rnd. 18:  10 dec (10). Rnd. 19:  work only 2 dec (2). Leave the remaining 6 st unworked.   Add more stuffing if needed. Fasten off, leaving a yarn tail. Using a tapestry needle, weave the yarn tail through the front loop of each remaining stitch and pull tight to close. Weave in the yarn end.   Sew the snout between the eyes With the help of sewing pins, position the snout at the center of the head, between the eyes, over Rnd. 12 and 15. Using a tapestry needle, sew tightly.   Sew the ears to the top of the head With the help of sewing pins, position the ears on top of the head, over Rnd. 7 and 8 , with the macadamia center facing forward (the front of the piece will be the side where the safety eyes were inserted). Using a tapestry needle, sew tightly. Note: align the ears and horns in such a way that they form an imaginary straight line across the head. This imaginary line divides the head into two equal parts: front and back.   Sew the horns to the top of the head With the help of sewing pins, position the horns at the top of the head, between Rnd. 3 and 5, about 1 st away from the ears,  leaving the highest side facing the ears.  Using a tapestry needle, sew tightly.   Make the face details ·         Using a tapestry needle and six strands of white embroidery thread (Maxi Mouliné #100), embroider the waterline. ·         Using a Crewel no. 9 embroidery needle and two strands of black embroidery thread (Maxi Mouliné #900), embroider the eyelashes. ·         With a Crewel no. 7 embroidery needle and three strands of white embroidery thread (Maxi Mouliné #100), embroider spots on the forehead, making 5 small straight stitches over Rnd. 5 and 9. ·         If you wish, apply blush on the cheeks and make a hanging loop for the ornament using a gold cord.   LEGS  (MAKE 2) In caramel yarn (#7076).   Rnd. 1:  start 6 sc in a magic ring (6). Rnd. 2:  [1 inc, 2 sc] x 2 (8). Rnd. 3–4 (2 ROUNDS):  8 sc (8). Fasten off the first leg. Repeat Rnd. 1–4 for the second leg, but don’t fasten off. In the next round, we’ll join both legs together and start crocheting the body.   BODY The body will be a continuation of the legs. Continue with the caramel yarn (#7076). Ch 2. Rnd. 5: ch 2. Then join the second leg to the first one with 1 sc into the first st of Rnd. 4 of the first leg. Continue the round by making 1 sc in the next 7 st on the first leg, sc in each of next 2 ch. Return to the second leg and make sc in next 8 st. Finish the round with 1 sc in the opposite side of each of the 2 ch (20). Rnd. 6:  20 sc (20). Rnd. 7:  3 sc, 1 dec, 8 sc, 1 dec, 5 sc (18). Rnd. 8:  2 sc, 1 dec, 8 sc, 1 dec, 4 sc (16). Rnd. 9:  2 sc, 1 dec, 6 sc, 1 dec, 4 sc (14). Rnd. 10:  14 sc (14). Rnd. 11 : work only 1 sc, 1 slst (2). Leave the remaining 12 st unworked.   Fasten off, leaving a long tail for sewing. Stuff the legs and body firmly with fiberfill. Sew the body below the head With the help of sewing pins, position the opening of the body at the bottom of the head, over Rnd. 18. Using a tapestry needle, sew tightly. If necessary, stuff the head and body with more fiberfill before closing the seam. ARMS  (MAKE 2) In caramel  yarn (#7076).   Rnd. 1:  start 6 sc in a magic ring (6). Rnd. 2–3 (2 ROUNDS):  6 sc (6). Rnd. 4:  1 dec, 4 sc (5). Rnd. 5:  work only 1 sc (1). Leave the remaining 4 st unworked. Flatten the arm opening so that the stitches line up. The arm doesn’t need to be stuffed. Rnd. 6: sc in next 2 st through both layers to close the opening (2). Fasten off, leaving a tail for sewing. Sew the arms to the body With the help of sewing pins, position the arms to both sides of the body, over the Rnd. 11, aligning these parts with the legs. Using a tapestry needle, sew tightly. TAIL In caramel  yarn (#7076). Rnd. 1:  leaving a starting yarn tail for sewing, work 6 sc in a magic ring (6). Rnd. 2:  3 dec (3). Note: due to the small size of the tail, you’ll need a bit more patience when working on the decreases! Fasten off, leaving a yarn tail. Using a tapestry needle, weave the yarn tail through the front loop of each remaining stitch and pull tight to close. Weave in the yarn end. Shape the piece, curving the tip. The tail doesn’t need to be stuffed. Tip: gently weave in the yarn end to maintain the tail's pointy shape. Sew the tail to the back With the help of sewing pins, position the tail on the back center of the body, over Rnd. 6 and 7. Using a tapestry needle, sew tightly.   SCARF The scarf will be worked alternating between the yarn colors  eco  (#5083) and carmine  (#3528). To ensure the scarf looks good on both sides, use the tapestry crochet technique to handle both colors of this piece, carrying the yarn along the work. Whenever transitioning from eco to carmine yarn , change colors in the traditional way by completing the eco stitch before switching to carmine. For the reverse transition, from carmine to eco , use an invisible color change: complete the final yarn-over of the carmine stitch with eco, rather than with carmine. Start in eco  yarn. Ch 37. Work all stitches in the back bumps of the foundation chain. Inserting the hook in the back bump of the third ch from the hook, make 1 dc. Switch to carmine  and make 1 dc. Return to eco and make 3 dc. Repeat the sequence [ {carmine} 1 dc, {eco}  3 dc] x 7. Switch again to carmine  and make 1 dc. Return to eco  and finish making 1 dc. Fasten off and weave in the yarn end. ASSEMBLY Fold 2 cm from one end of the scarf at a 90º angle, with the wrong sides facing inwards. Apply a small amount of glue on the inside of the fold to keep it in place. Wrap the scarf around the reindeer's neck, with the wrong side facing outwards, and glue the other end of the scarf so that it stays in place. BOOT To make the boot softer, use a crochet hook 0.75 mm larger than the one used for the reindeer.  For example: If you crocheted the reindeer with Amigurumi yarn and a 2 mm crochet hook, work the boot with a 2.75 mm crochet hook. If you crocheted the reindeer with Amigurumi Slim yarn and a 1.5 mm crochet hook, work the boot with a 2.2 mm crochet hook. Ensure you are using the correct crochet hook size To ensure you're using the correct hook size, make the foundation chains indicated for Part 1 of the boot and join them into a ring. Place this chain ring around the reindeer’s neck while it’s wearing the scarf. There should be about one finger’s width (approx. 1 cm) of space between the foundation chains and the reindeer. If the ring feels too loose, switch to a smaller crochet hook; if it’s too tight, try a larger one. These adjustments will help ensure the boot is the correct size. PART 1 In carmine  yarn (#3528). Ch 30. Ensure your chain isn't twisted, then insert the hook into the first chain stitch. Join the foundation chain with 1 slst to form a ring. Continue working in a spiral. Rnd. 1–8 (8 ROUNDS):  30 sc (30). Rnd. 9:  1 dec, 28 sc (29). Rnd. 10–13 (4 ROUNDS):  29 sc (29). Rnd. 14:  15 sc, 1 inc, 13 sc (30). Rnd. 15:  1 dec, 13 sc, 2 inc, 13 sc (31). Rnd. 16:  1 dec, 12 sc, 1 inc, 2 sc, 1 inc, 11 sc, 1 dec (31). Rnd. 17:  1 dec, 11 sc, 1 inc, 4 sc, 1 inc, 10 sc, 1 dec (31). Rnd. 18:  1 dec, 27 sc, 1 dec (29). Rnd. 19:  1 dec, 9 sc, [1 dec, 1 sc] x 3, 7 sc, 1 dec (24). Rnd. 20:  1 dec, 8 sc, [1 dec, 1 sc] x 2, 6 sc, 1 dec (20). Rnd. 21:  1 dec, 5 sc, 3 dec, 5 sc, 1 dec (15). Rnd. 22:  work only 7 dec (7). Leave the last st unworked. Fasten off, leaving a yarn tail. Using a tapestry needle, weave the yarn tail through the front loop of each remaining stitch and pull tight to close. Weave in the yarn end. RUFFLE To make the ruffle of the boot, pull a loop of off-white (#8176) through the remaining loop of the last chain of Part 1 (this is the free loop of the last stitch of Rnd. 1 of Part 1). Insert the crochet hook from the inside of the boot to the outside and work the first stitch of the next round from this position. Rnd. 1–2 (2 ROUNDS):  30 sc (30). Rnd. 3:  [1 inc, 14 sc] x 2 (32). Rnd. 4:  [1 sc, skip the next st, 5 dc in the next st, skip the next st] x 8 (48).   Make 1 slst into the first st of the Rnd. 4 before starting the next round. Rnd. 5: [ch 1, 1 slst] x 48 (48 - the ch don’t count as stitches). Invisible fasten off and weave in the yarn end. Fold the ruffle outward.   If you wish, hang two gold mini jingle bells on the back of the boot.   Using a Milliner no. 7 embroidery needle and three strands of white embroidery thread (Maxi Mouliné #100), embroider French knots on the boot.   If you wish to use the boot as an individual ornament, make a hanging loop using a gold cord. However, if the ornament is used together with the reindeer (reindeer inside the boot), the cord is not necessary. The boot fits securely around the reindeer, and the reindeer's cord is sufficient to hang both. Created by: LovLoops Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/06/2024 Level of difficulty Size:  12.6 inches tall x 8.6 inches in diameter   Materials: 1 Premium T-Shirt yarn roll – Colors: 3881 (Love Apple), 8001 (White), 7316 (Henna), 5767 (Brazilian Green), 8243 (Grey Resin) and 3363 (Rose) 1 Amiguurmi Soft yarn ball – Color: 8001 (White) 1 Fofura yarn roll – Color: 361 (Passion) 1 Maxxi Retrós thread – Color: 998 (Black) Crochet hook – 4.0 mm & 7.0 mm Fabric Glue Round MDF Base with Holes – Size: 7.87 inches in diameter 1 safety eye – 10 mm Stitch Glossary & Abbreviations:  st. (Stitch), sts. (Stitches), ch. (Chain), sl st. (Slip Stitch), rnd. (Round), sc. (Single Crochet), Wc st. (Waistcoat Stitch), inc. (increase of 2 stitches in the same base stitch), dec. (decrease of 2 waistcoat stitches closed together), FP sl st. (Front Post Slip Stitch), hdc. (Half Double Crochet), BL hdc. (Back Loop Half Double Crochet), BL sc. (Back Loop Single Crochet), Magic Ring,Invisible Round Closure (Slip the loop off the hook, insert it into the first stitch of the round, pull the loop through, and remove it from the hook, setting it aside for the next step. Insert the hook into the middle of the stitch formed, yarn over, and pull it to the front. Insert the hook into the reserved loop, yarn over, and pull through both loops at once.).   Instructions The Basket uses the tapestry crochet technique. In this technique, work with 2 or more yarns in the same round, changing colors as indicated by the chart. To change colors, finish the last 2 loops on the hook with the new color, and hide the unused yarn over the previous round, weaving it between the stitches of the new color.   Chart 1 - Head With the Henna yarn and 7.0 mm hook, start with a magic ring. Work in circular rounds, closing all the rounds with invisible round closure. 1- 7 wc st. inside of a magic ring. 2- 7 inc. (14) 3- (1 wc st., 1 inc.) x7 (21) 4- 21 wc st. 5- (2 wc st., 1 inc.) x7 (28) 6- (3 wc st., 1 inc.) x7 (35) 7- 35 wc st. 8- (4 wc st., 1 inc.) x7 (42) 9- 42 wc st. 10- Join the Love Apple yarn and extend it over the base rnd., with the Henna yarn, work: (5 wc st., 1 inc.) x3, 2 wc st., change to Love Apple yarn, 1 wc st., change to Henna yarn, 2 wc st., 1 inc., (5 wc st., 1 inc.) x3. (49) 11- With the Henna yarn, work: 22 wc st., change to Love Apple, 4 wc st., change to Henna yarn, 23 wc st. (49) Fasten off the Henna yarn. 12 to 19- With the Love Apple yarn, work: (1 inc., 6 wc st.) x7 (56), and then 56 wc st. in the other rnd. Fasten off.   Glue the eye between rnd. 14 and 15 of the head.Cut 2 pieces of Maxxi Retrós Black thread, approximately 0.6” long, twist them together, and glue them to the head between rnd. 12 and 13, aligning them with the eye and leaving a 2-stitch gap between them, following the assembly diagram.Cut 2 more pieces of Maxxi Retrós Black thread, approximately 1.2” long, twist them together, and glue them to the head over rnd. 18, aligning them with the eye.   Chart 2 – Ears (2x) With the Rose yarn and 7.0 mm hook, start with a magic ring. 1- 6 sc. (close the magic ring forming a half-moon) Make 2 identical ears and glue them between the 14th and 16th rnd. of the head, aligning them on the sides, following the assembly diagram.   Chart 3 – Nose With the Passion yarn and 4.0 mm hook, make with 5 ch. 1- Start in the 3rd ch. from the hook, work: 2 sc., 3 sc. in the last base ch., on the other side of the foundation ch.: 2 sc., 1 inc. in the last ch. Close with sl st., fasten off the yarn. Glue the nose between rnd. 16 and 17, centering it on the front of the head. Follow the assembly diagram.   Chart 4 – Body With the Love Apple  yarn and 7.0 mm hook, work in circular rounds, closing all the rounds with invisible round closure. 1- Fill the MDF base with 69 sc (if the base has fewer holes, distribute inc. throughout the round).  Make an invisible round closure. 2- 69 FP sl st. 3- 69 sc. Fasten off the yarn. 4- Join the White yarn, 69 wc st. Fasten off the yarn. 5- Join the Love Apple yarn, 69 wc st. Fasten off the yarn. 6- Join the White yarn, 69 wc st. Fasten off the yarn. 7 to10- Join the Grey Resin yarn, 69 BL sc. Fasten off the yarn. 11- Join the Brazilian Green, 67 wc st., 1 dec. (68) 12- 68 wc st. 13- (Join the Love Apple yarn and work 1 wc st., change to Brazilian Green yarn, 3 wc st.) x17 (68) Continue following chart 4, working in circular rounds, making the appropriate color changes, and closing all the rounds with an invisible closure. Fasten off the yarns.   Chart 5 – Hat With the Passion yarn and 4.0 mm hook, make 32 ch. Close with 1 sl st., forming a circle. 1- Work in the right side of the piece: Start with 2 ch., 31 hdc. Close with sl st. 2- Work in the wrong side of the piece: Start with 2 ch., 31 hdc. Close with sl st. 3- Work in the right side of the piece: Start with 2 ch., 31 hdc. Close with sl st. Continue following chart 5, working in back-and-forth rows, alternating one row on the right side and the next on the wrong side of the piece.Fasten off, leaving a yarn tail to close the hat.Pass the finishing yarn through every 3 stitches and close the top of the hat, gathering and securing the last row. Fasten off the yarn.   With Amigurumi Soft White yarn, make a pom-pom of approximately 2” in diameter and sew it to the top of the hat, following the assembly diagram.   Chart 6 – Hat Cuff Join the Amigurumi Soft White yarn to the brim of the hat, over the initial ch. of chart 5, and work with a 4.0 mm hook. Start with 2 ch., 31 hdc. Close with sl st. Fasten off, leaving a yarn tail for sewing. Fold the cuff up and make a few stitches to secure it in place. Fasten off the yarn.Glue the hat onto the head, following the assembly diagram. Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/06/2024 Level of difficulty Approximate size:  11.8” in height x 8.7” in diameter   Materials: 1 Premium T-Shirt yarn roll – Colors: 8001 (White), 8243 (Grey Resin), 3881 (Love Apple), 7316 (Henna) & 3363 (Rose) 1 Amigurumi Soft yarn ball – Color: 8001 (White) 1 Fofura yarn ball – Color: 361 (Passion) Crochet Hook – 4.0mm & 7.0 mm Fabric Glue Round MDF Base with Holes – Size: 7.87” in diameter 1 pair of Safety Eyes – 10 mm 4 Golden Buttons – 10 mm Stitch Glossary & Abbreviations:  st. (Stitch), sts. (Stitches), ch. (Chain), sl st. (Slip Stitch), rnd. (Round), sc. (Single Crochet), Wc st. (Waistcoat Stitch), inc. (increase of 2 stitches in the same base stitch), dec. (decrease of 2 waistcoat stitches closed together), FP sl st. (Front Post Slip Stitch), hdc. (Half Double Crochet), dc. (Double Crochet), BL sc. (Back Loop Single Crochet), BL hdc. (Back Loop Half Double Crochet), Magic Ring, Invisible Round Closure (Slip the loop off the hook, insert it into the first stitch of the round, pull the loop through, and remove it from the hook, setting it aside for the next step. Insert the hook into the middle of the stitch formed, yarn over, and pull it to the front. Insert the hook into the reserved loop, yarn over, and pull through both loops at once.).   Instructions Chart 1 - Head With the Rose yarn, start with a magic ring. Work in circular rounds, closing all the rounds with invisible round closure. 1- 7 wc st. inside of a magic ring. 2- 7 inc. (14) 3- (1 wc st., 1 inc.) x7 (21) 4- 21 wc st. 5- (2 wc st., 1 inc.) x7 (28) 6- (3 wc st., 1 inc.) x7 (35) 7- 35 wc st. 8- (4 wc st., 1 inc.) x7 (42) 9- 42 wc st. 10- (5 wc st., 1 inc.) x7 (49) 11- 49 wc st. 12- (6 wc st., 1 inc.) x7 (56) 13 to 18- 56 wc st. Fasten off the yarn. Glue the eyes between rnd. 12 and 13, leaving a 5-stitch space between them. Glue the glasses centered on the eyes, following the assembly diagram.With the Amigurumi Soft White yarn, embroider the eyebrows just above the eyes, following the assembly diagram.   Chart 2 – Ears (2x) With the Rose yarn and 7.0 mm hook, start with a magic ring. 1- 6 sc. (close the magic ring forming a half-moon ) Make 2 identical ears and glue them between rnd. 12 and 13 of the head, aligning them on the sides, following the assembly diagram.   Chart 3 – Nose With the Rose yarn, start with 4 ch. 1- Start in the 2nd ch. from the hook, work: 1 sc., 3 sc. in the last base ch., 1 sc., 1 inc. 2- 8 sc. Close with sl st. Fasten off the yarn. Glue between rnd. 14 and 15, centering it on the front of the face, following the assembly diagram.   Chart 4 – Moustache (2x) With the Amigurumi Soft White yarn and 4.0 mm hook, start with a magic ring. 1- 7 sc. inside of a magic ring 2- 7 inc. (14) 3- (1 sc., 1 dec.) x2, (2 sc. 1 dec.) x2 (10) 4- (1 sc., 1 dec.) x2, 2 sc. 1 dec. (7) 5- 3 sc., 1 dec., 2 sc. (6) 6- (1 sc. 1 dec.) x2 (4) Close with a reverse magic ring. Fasten off the yarn. Make two identical pieces. Glue just below the nose, following the assembly diagram.   Chart 5 – Beard With the Amigurumi Soft White yarn and 4.0 mm hook, start with 43 ch. 1- Start in the 3rd ch. from the hook, work: 6 sc., 1 hdc., 2 dc. in the same base st., 2 dc. in the same base st., 1 dc., 2 ch., 1 sc. , repeat from to 5x more, 5 sc. Fasten off the yarn. Glue the beard with the ends next to the ears and the bottom aligned with the last round of the head, following the assembly diagram.   Chart 6 – Body With the Love Apple yarn and 7.0 mm hook. 1- Fill the MDF base with 69 sc. (if the base has fewer holes, distribute inc. throughout the round). Make an invisible round closure. 2- 69 FP sl st. 3- 69 sc. Make and invisible round closure. 4 to 6- 69 wc st. Make and invisible round closure. Fasten off the yarn. Continue following chart 6, working in circular rnd, making the necessary color changes. Close all rnd. with invisible round closure. Fasten of the yarns. Glue the buttons, following the assembly diagram.   Chart 7 – Hat With the Passion yarn and 4.0 mm hook, make 38 ch. Close with 1 sl st., forming a circle. 1- Work in the right side of the piece: Start with 2 ch., 37 hdc. Close with sl st. 2- Work in the wrong side of the piece:, Start with 2 ch., 37 hdc. Close with sl st. 3- Work in the right side of the piece:, Start with 2 ch., 37 hdc. Close with sl st. Continue following chart 7, working in circular rounds, alternating one round on the right side and the next on the wrong side of the piece. Fasten off, leaving a yarn tail to close the hat. Pass the finishing yarn through every 3 stitches and close the top of the hat, gathering and securing the last round. Fasten off the yarn. With Amigurumi Soft White yarn, make a pom-pom of approximately 2” in diameter and sew it to the top of the hat, following the assembly diagram.   Chart 8 – Hat Cuff Join the Amigurumi Soft White yarn to the brim of the hat, over the initial ch. of chart 7, and work with a 4.0 mm hook. 1 to 4- Start with 2 ch., 37 hdc. Close with sl st. Fasten off the yarn. Fold the cuff up. Glue the hat onto the head, following the assembly diagram. Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/06/2024 Level of difficulty Approximate size:  3.15”   Materials: Headband; Styrofoam balls – 60 mm; 1 Amigurumi yarn ball - Colors: #8001 (White), #7076 (Caramel), #7567 (Cocoa) & #3402 (Círculo Red); Crochet hook – 2.0 mm & 2.5 mm; Safety eyes (8 mm) – Black; Tapestry needle;Polyester stuffing; Locking stitch marker. Stitch Glossary & Abbreviations: Increase = inc.; Chain = ch.; Decrease = dec.; Slip Stitch = sl st.; Single Crochet = sc.; End of Round = eor; Place Marker = pm.   Instructions Head With Amigurumi yarn #7076 (Caramel) and 2.5 mm hook 1- 6 sc. inside a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 2 sc., 1 inc. to eor = 24 sc.; 5- 3 sc., 1 inc. to eor = 30 sc.; 6- 4 sc., 1 inc. to eor = 36 sc.; 7 to 15 (9 rounds): 36 sc. Place the safety eyes between rnd. 10 & 11, with 5 stitches between them. Place the styrofoam ball. 16- 4 sc., 1 dec. to eor = 30 sc.; 17- 3 sc., 1 dec. to eor = 24 sc.; 18- 2 sc., 1 dec. to eor = 18 sc. Stuff it. 19- 1 sc., 1 dec. to eor = 12 sc. 20- 3 dec. = 3 sc. (there are leftover stitches in the second-to-last rnd.) Fasten off with a reverse magic ring the leftover sts. from the second-to-last rnd. with the 3 sts. from the last rnd.   Base to cover the headband With the Amigurumi yarn #7076 (Caramel) and 2.5 mm hook 1- 6 sc. inside of a magic ring; Make approximately 80 rnd. of 6 sc. to cover the headband. Fasten off with a reverse magic ring.  Sew the head to the top of the headband.   Ears (2) With the Amigurumi yarn #7076 (Caramel) and 2.5 mm hook 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3 to 6 (4 rounds): 12 sc.; 7- 1 sc., 1 dec. to eor = 8 sc. Fasten off, leaving a yarn tail for sewing. Sew on the sides of the head.   Snout With the Amigurumi yarn #8001 (White) and 2.5 mm hook   1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc. Fasten off, leaving a yarn tail for sewing. Sew on the head below the eyes.   Nose With the Amigurumi yarn #3402 (Círculo Red) and 2.5 mm hook  1- 6 sc. inside of a magic ring; 2- 6 sc. Fasten off. Sew or glue on the snout.   Smaller part of the horns (2) With the Amigurumi yarn #7567 (Cocoa) and 2.0 mm hook 1- 6 sc. inside of a magic ring; 2- 2 sc., 1 inc. to eor = 8 sc.; 3 & 4- 8 sc. Fasten off.   Bigger part of the horns (2) With the Amigurumi yarn #7567 (Cocoa) and 2.0 mm hook 1- 6 sc. inside of a magic ring; 2- 2 sc., 1 inc. to eor = 8 sc.; 3 to 8 (6 rounds)- 8 sc. Fasten off, leaving a yarn tail for sewing.. Sew on the top of the head.Glue or sew the smaller part to the bigger part.   Scarf With the Amigurumi yarn #3402 (Círculo Red) and 2.5 mm hook Go up 35 ch., skip the 1st one, and work 34 sc. Created by: Fabiana Gonçalves (@atelielinhaseagulhas) Pattern review by: Patty Wolf Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/06/2024 Level of difficulty Size: Bag: 4.9” x 1.2” x 7.3”  (Handle:  47.2” with snap hooks) Santa’s Hat Keychain:  2” x 2.6”   Materials: 1 Premium T-Shirt yarn roll – Color: 3881 (Love Apple) Premium T-Shirt yarn scraps – Colors: 8990 (Black), 1289 (Canary) & 7684 (Porcelain) Crochet Hook – 5.0 mm & 7.0 mm Tapestry Needle – No. 13 Silicone Glue Scissors 2 Oval Snap Hooks 1 Swivel Ring 1 Magnetic Button Stitch Glossary & Abbreviations:  st. (Stitch), sts. (Stitches), ch. (Chain), sl st. (Slip Stitch), rnd. (Round), sc. (Single Crochet), Wc st. (Waistcoat Stitch), hdc. (Half Double Crochet), dc. (Double Crochet), BL sc. (Back Loop Single Crochet), inc. (increase of 2 stitches in the same base stitch), Magic Ring, Invisible Round Closure (Slip the loop off the hook, insert it into the first stitch of the round, pull the loop through, and remove it from the hook, setting it aside for the next step. Insert the hook into the middle of the stitch formed, yarn over, and pull it to the front. Insert the hook into the reserved loop, yarn over, and pull through both loops at once.).   Instructions Chart 1 – Bottom of the Bag With the Love Apple yarn and 7.0 mm hook, start with 10 ch. + 1 ch. to turn the work. 1- Start in the 2nd ch. from the hook, work: 9 sc., 3 sc. in the same base ch., on the other side of the foundation ch., work: 8 sc., 1 inc. Close with invisible round closure. Set the yarn aside.   Chart 2 – Lateral Continue with the Love Apple yarn from chart 1. 1- 22 BL sc. Close with invisible round closure. 2 to 5- 22 wc st. Close with invisible round closure. Fasten off the yarn and glue the ends. Join the Black yarn. 6 & 7- 22 wc st. Close with invisible round closure. Fasten off the yarn and glue the ends. Join the Love Apple yarn. 8 to 15- 22 wc st. Close with invisible round closure. 16- 1 sl st., 1 ch. , repeat from to all around the round. Fasten off the yarn and glue the ends.   Chart 3 – Buckle Embroidery With the Canary yarn and 5.0 hook, work the embroidery by making sl sts. Hold the yarn inside the piece, insert the hook between the sts. of the base round, yarn over the yarn inside, and pull it out, leaving a loop on the hook. Insert the hook again into the next base st., yarn over, and pull it out; pass the same yarn through the reserved loop on the hook, forming a new loop. Work to create a buckle shape over the black section, centering it on the front of the bag, following the number of sts. in Chart 3. Fasten off the yarn and glue the ends.   Chart 4 – Handle Join the Love Apple yarn to one of the snap hooks and work with a 5.0 mm hook: 1- 3 sc. into the snap hook 2 to 127- 3 sc. Fasten off the yarn, leaving a tail for sewing. Using a tapestry needle, sew the snap hook onto the last row of the handle, and glue the ends.   Chart 4 – Santa’s Hat Keychain With the Love Apple yarn and 7.0 mm hook, start with 4 ch. + 1 ch. to turn the work. 1- Start in the 2nd ch. from the hook, work: 1 sl st., 1 sc., 1 hdc., 1 dc. 2- Go up 1 ch., work 4 sc. into the side of the dc. from the 1st row.Fasten off the yarn, leaving a tail to attach the ring. Slide the yarn between the sts. to the tip of the hat, make a loop through the ring, tie it on the back side, and glue the ends. 3- Join the Porcelain yarn to the 1st st. of the 2nd row, work: 1 inc., 1 sc. , repeat from to one more time. Fasten off the yarn and glue the ends. Designer:  Fernanda Maria Isaac – @negramariafeitoamao Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/06/2024 Level of difficulty Size: 11 inches tall x 8.6 inches in diameter   Materials: 2 Premium T-Shirt yarn rolls – Color: 8001 (White) 1 Premium T-Shirt yarn roll – Colors: 2802 (Deep Sea), 8990 (Black) & 3881 (Love Apple) 1 Amigurumi Soft yarn ball – Color: 4456 (Orange) 1 Fofura yarn roll – Color: 361 (Passion) 1 Maxxi Retrós thread – Color: 998 (Black) Crochet hook – 7.0 mm Fabric glue Round MDF Base with Holes – Size: 7.87 inches in diameter 1 pair of oval safety eyes, 20 x 15 mm 2 golden buttons – 15 mm Stitch Glossary & Abbreviations:  st. (Stitch), sts. (Stitches), ch. (Chain), sl st. (Slip Stitch), rnd. (Round), sc. (Single Crochet), Wc st. (Waistcoat Stitch), inc. (increase of 2 stitches in the same base stitch), dec. (decrease of 2 waistcoat stitches closed together), FP sl st. (Front Post Slip Stitch), hdc. (Half Double Crochet), dc. (Double Crochet), tr. (Treble Crochet), BL sc. (Back Loop Single Crochet), FL sc. (Front Loop Single Crochet), Magic Ring,Invisible Round Closure (Slip the loop off the hook, insert it into the first stitch of the round, pull the loop through, and remove it from the hook, setting it aside for the next step. Insert the hook into the middle of the stitch formed, yarn over, and pull it to the front. Insert the hook into the reserved loop, yarn over, and pull through both loops at once.).   Instructions Chart 1 - Head With the White yarn, start with a magic ring. Work in circular rounds, closing all the rounds with invisible round closure. 1- 7 wc st. inside of a magic ring. 2- 7 inc. (14) 3- (1 wc st., 1 inc.) x7 (21) 4- 21 wc st. 5- (2 wc st., 1 inc.) x7 (28) 6- (3 wc st., 1 inc.) x7 (35) 7- 35 wc st. 8- (4 wc st., 1 inc.) x7 (42) 9- 42 wc st. 10- (5 wc st., 1 inc.) x7 (49) 11- 49 wc st. 12- (6 wc st., 1 inc.) x7 (56) 13 to 18- 56 wc st. Fasten off. Glue the eyes between rnd. 10 and 11, leaving a 6-stitch gap.Cut 2 pieces of Maxxi Retrós Black thread, approximately 1” long, twist them together, and glue them just above the eyes to form the eyebrows. Make the other eyebrow the same way, following the assembly diagram.For the mouth, cut 2 pieces of yarn, each of 2” long, twist them together, and glue them over rnd. 16 and 17, following the assembly diagram.   Chart 2 – Hat With the Black yarn, start with a magic ring. Work in circular rounds, closing all the rounds with invisible round closure. 1- 7 wc st. inside of a magic ring. 2- 7 inc. (14) 3- (1 wc st., 1 inc.) x7 (21) 4- 21 wc st. 5 & 6- 21 wc st. Fasten off the yarn. 7- Join the Love Apple yarn, 21 wc st. Fasten off. 8- Join the Black yarn, (2 FL sc., 1 inc.) x7 (28) Fasten off the yarn.   Glue on the head following the assembly diagram.   Chart 3 – Nose With the Orange yarn, work with a double strand, and start with 11 ch. 1- Start in the 3rd ch. from the hook, make: 1 sl st., 2 sc., 3 hdc., 2 dc., 1 tr. Fasten off the yarn. Glue between rnd. 15 and 16, following the assembly diagram.   Chart 4 – Suspenders (2x) With the Passion yarn, work with a double strand. 1- Go up 3 ch., start in the 2nd ch. from the hook: 2 sc. 2 to 12- Start with 1 ch., 2 sc. Fasten off the yarn. Sew a button onto one end of the suspender. Make 2 identical pieces and set aside.   Chart 5 – Body Work with the Deep Sea yarn. 1- Fill the MDF base with 69 sc (if the base has fewer holes, distribute inc. throughout the round).  Make an invisible round closure. 2- 69 FP sl st. 3 to 8- 69 wc st., make an invisible round closure. Fasten off the yarn. Continue following chart 5, working in circular rounds, making the appropriate color changes, and closing all the rounds with an invisible closure. Fasten off the yarns. Glue the end of the suspender with the button onto the 8th rnd., and the other end onto the 15th rnd., with 10 stitches between each suspender, following the assembly diagram. Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/06/2024 Level of difficulty Size: Mug Cozy:  11.8 x 3.3 inches (side handle: 4.7 inches) Spoon Ornament: 2.8 x 2.4 inches   Materials: 1 Premium T-Shirt yarn roll – Color: 3528 (Carmine) Premium T-Shirt yarn scraps – Colors: 1289 (Canary) & 5767 (Brazilian Green) Crochet Hook – 5.00 mm & 7.0 mm Tapestry Needle No. 13 Silicone Glue Scissors Measuring Tape Stitch Glossary & Abbreviations:  st. (Stitch), sts. (Stitches), ch. (Chain), sl st. (Slip Stitch), rnd. (Round), sc. (Single Crochet).   Instructions Chart 1 – Mug Cozy With the Carmine yarn and the 5.0 mm hook, start with 30 ch. + 1 ch. to turn the work. 1- Start in the 2nd ch. from the hook, and work: 30 sc. 2 to 7- 1 ch., 30 sc. Go up 19 ch., close with 1 sl st. on the side of the 1st row. Fasten off the yarn. Join the Carmine yarn on the opposite side at the edge of the last row, go up 19 ch., close with 1 sl st on the side of the 1st row. Fasten off the yarn and glue the ends.   Embroidery: Using a tapestry needle and the Brazilian Green and Canary yarns, embroider 3 pine trees following the embroidery diagram.   Chart 2 – Spoon Ornament With the Canary yarn and the 7.0 mm hook, start with a magic ring. 1- Make 4 ch., start in the 2nd ch. from the hook: 1 sl st., 1 sc., 1 sc. in the magic ring, go up 3 ch., start in the 2nd ch. from the hook: 1 sl st., 1 sc. , repeat from to 3x more. Close with sl st. Fasten off the yarn and glue the ends. Make 2 identical pieces. Place one piece back to back with the other, sew the sides and the top, leaving the bottom open to fit onto the spoon. Designer:  Fernanda Maria Isaac – @negramariafeitoamao Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/06/2024 Level of difficulty Size: 17.7 x 17.7 inches   Materials: 1 Premium T-Shirt yarn roll – Colors: 8001 (White), 3528 (Carmine) & 5767 (Brazilian Green) Círculo Crochet Hook – 7.0 mm Tapestry Needle Stitch Glossary & Abbreviations:  st. (Stitch), sts. (Stitches), ch. (Chain), sl st. (Slip Stitch), rnd. (Round), sc. (Single Crochet), dc. (Double Crochet), FP dc. (Front Post Double Crochet).   Gauge: A 4-inch square, made in fantasy st. with Premium T-Shirt Yarn and a 7.0 mm hook, measures 7 sts. x 8 rows.   Instructions Chart 1 With the Brazilian Green yarn, start with 30 ch. + 1 ch. to turn the work. 1- Start in the 4th ch. from the hook, work: 30 dc. 2- Start with 1 ch., 30 sc. 3- Start with 3 ch., 1 FP dc. taking the st. from the 1st row., 1 dc. in the base row , repeat from to until the end of row. Keep following chart 1, working in back-and-forth rows, making the appropriate color changes. Fasten off the Carmine and White yarns, set the Brazilian Green yarn aside.   Chart 2 - Contouring Continue with the Brazilian Green yarn from chart 1. 1- In the corner, work: 3 sc. in the same base space, along the side, work: 1 sc. in each base st. , repeat from to , all around the piece. Close with sl st. Fasten off the yarn.   Chart 3 Join the Carmine yarn in the corner, work along the side of the piece in back-and-forth rows. 1 to 9- Start with 4 ch., skip 1 base space, 1 dc., 1 ch., skip 1 base space , repeat from to until the end of row. Finish with 1 dc. Fasten off the yarn.   Chart 4 Join the Brazilian Green yarn in the corner, work along the side of the piece in back-and-forth rows. 1 to 10- Start with 4 ch., skip 1 base space, 1 dc., 1 ch., skip 1 base space , repeat from to until the end of row. Finish with 1 dc. Fasten off the yarn.   Fold the 2 parts (Charts 3 and 4) at the back of the piece, sew the sides using a tapestry needle and the Brazilian Green yarn.   Cord:  Work each cord with 20 ch. Make 3 cords on each side of the opening, leaving a space of 6 “squares” between each cord. Use the same yarn color on both sides of the opening. Designer : Heloisa Mazoni Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/06/2024 Level of difficulty Size: 17.7 x 12.6 inches   Materials: 2 Premium T-Shirt yarn rolls – Color: 8001 (White) 1 Premium T-Shirt yarn roll – Colors: 5767 (Brazilian Green) & 3528 (Carmine) 1 Encanto yarn roll – Color: 7326 (Old Gold) Chochet Hook – 7.0 mm & 4.5 mm Silicone Glue Gauge: A 4-inch square, made in sc., with Premium T-shirt Yarn and a 7.0 mm hook, measures 9 sts. x 9 rows.   Stitch Glossary & Abbreviations:  st. (Stitch), sts. (Stitches), ch. (Chain), sl st. (Slip Stitch), rnd. (Round), sc. (Single Crochet).   Instructions Chart 1 With the White yarn and the 7.0 mm hook, start with 26 ch. + 1 ch. to turn the work. 1- Start in the 2nd ch. from the hook, work: 26 sc. 2 & 3- 1ch., 26 sc. Fasten off the yarn. Keep following Chart 1, working in back-and-forth rows. Fasten off the Carmine and Brazilian Green yarns, set the White yarn aside. Make 2 identical pieces.   Chart 2 – Finishing Continue with the White yarn from Chart 1. 1- In the corner, work: 1 sc., 2 ch., and 1 sc. in the same base st., along the side, work: 1 sc. in each base st. , repeat from to all around the piece. 2- Make 1 sl st. in each base st., going all around the piece. Close with sl st. Fasten off the yarn. 3- Join the Old Gold yarn and work, with the 4.5 mm hook, 1 sl st. in each base st., taking the center of the sl sts. from the previous row. Close with sl st. Fasten off the yarn and glue the ends with Silicone Glue, so that the work doesn’t fall apart.   Work the same way on both pieces. Designer: Rosana Recchia Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/06/2024 Level of difficulty Size: 19 x 19 inches   Materials: Mollet yarn (100 g – 3.5 oz) - 1 skein in each color: 10 (White), 142 (Pepper) and 5545 (Brazilian Green); Circular knitting needle 5.0 mm, 31” long steel cable; Círculo tapestry needle; Tracing paper; Pencil; Scissors; Measuring tape. Pillow stuffing (19 x 19 inches) Abbreviations: foll.:  following , r.:  row,  len.:  length , diag.: diagram,  k.: knit,  st.: stitch , sts.: stitches,  rep.: repeat(s),  BO:  bind off,  p.: purl .  Stitches used in knitting:  1/1 ribbing: follow Chart 1, knit stitch: follow Chart 2, jacquard tree and gift box (knit stitch): follow Chart 2.   Gauge: A 4-inch square in knit stitch (Chart 2) on 5.0 mm circular needles = 17 stitches x 22 rows.   Instructions Transfer the pattern pieces to tracing paper to use as a reference while working the piece. Follow the arrows in the measurement diagram for the direction of the work.   Knit the entire piece in back-and-forth rows.   Tree and gift box pillow cover: Using the white Mollet yarn, cast-on 89 stitches with 5.0 mm circular needles. Knit 87 sts. according to the specified stitches (Charts 1 and 2) and 1 st. on each side for the edges. Start with a 1/1 ribbing following Chart 1 and the repeat sts. for 3 cm/1.2 inches. Switch to the Mollet yarn in the pepper color, knit in stockinette st. following Chart 2 and the repeat sts. for 7 cm/2.75 inches. On the next row, knit the jacquard tree and gift box pattern following Chart 2 from row 1 to row 85, following the color changes of the Mollet yarn (white, pepper, and flag colors) as indicated in the color legend and on the chart. On the next row, with the Mollet yarn in the pepper color, knit in stockinette st. following Chart 2 and the repeat sts. for 10 cm/3.9 inches. Still using the Mollet yarn in the pepper color, knit in 1/1 ribbing following Chart 1 and the repeat sts. for 3 cm/1.2 inches. Switch back to the Mollet white yarn and knit in stockinette stitch following Chart 2 and the repeat sts. for 37 cm/14.5 inches. When the piece reaches 100 cm/39.3 inches in length from the beginning, bind off all stitches. Assembly:  Use the tapestry needle and Mollet yarn in the colors (white or pepper) according to the piece. Close the sides of the piece (19 inch.) with running stitches. Insert the cover into the pillow stuffing and sew the top of the piece with running stitches. Designer : Joseli Drigo Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/06/2024 Level of difficulty Approximate size:  3.15”   Materials: Headband; Styrofoam balls – 60 mm; 1 Amigurumi yarn ball – Colors: #7148 (Craft), #8001 (White) & #3402 (Círculo Red); Amigurumi yarn scraps – Color: #8990 (Black); 1 Amigurumi Pelúcia yarn ball – Color: #8001 (White); Crochet hook – 2.0 mm & 2.5 mm; Safety eyes (8 mm) – Black; Tapestry needle;Polyester stuffing; Locking stitch marker. Stitch Glossary & Abbreviations: Increase = inc.; Chain = ch.; Decrease = dec.; Slip Stitch = sl st.; Single Crochet = sc.; End of Round = eor; Place Marker = pm.   Instructions: Head With the Amigurumi yarn #7148 (Craft) and 2.5 mm hook 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 2 sc., 1 inc. to eor = 24 sc.; 5- 3 sc., 1 inc. to eor = 30 sc.; 6- 4 sc., 1 inc. to eor = 36 sc.; 7 to 15 (9 rounds): 36 sc. Place the safety eyes between rnd. 10 & 11, with 5 stitches between them. Place the styrofoam ball. 16- 4 sc., 1 dec. to eor = 30 sc.; 17- 3 sc., 1 dec. to eor = 24 sc.; 18- 2 sc., 1 dec. to eor = 18 sc. Stuff it. 19- 1 sc., 1 dec. to eor = 12 sc. 20- 3 dec. = 3 sc. (there are leftover stitches in the second-to-last rnd.) Fasten off with a reverse magic ring the leftover sts. from the second-to-last rnd. with the 3 sts. from the last rnd.   Base to cover the headband With the Amigurumi yarn #7148 (Craft) and 2.5 mm hook 1- 6 sc. inside of a magic ring; Make approximately 80 rnd. of 6 sc. to cover the headband. Fasten off with a reverse magic ring. Sew the head to the top of the headband.   Ear With the Amigurumi yarn #7148 (Craft) and 2.5 mm hook 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 18 sc. Fasten off, leaving a yarn tail for sewing.Sew on one side of the head.   Snout With the Amigurumi yarn #8001 (White) and 2.5 mm hook 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 12 sc. Fasten off, leaving a yarn tail for sewing. Sew between rounds 12 and 16 of the head. Stuff the piece before finishing sewing. With the Amigurumi yarn #8990 (Black),  embroider the nose and the mouth line.   Hat Start with the Amigurumi yarn #3402 (Círculo Red) and 2.5 mm hook 1- 6 sc. inside of a magic ring; 2- 1 sc., 1 inc. to eor = 9 sc.; 3- 9 sc.; 4- 2 sc., 1 inc. to eor = 12 sc.; 5- 12 sc.; 6- 3 sc., 1 inc. to eor = 15 sc.; 7- 15 sc.; 8- 4 sc., 1 inc. to eor = 18 sc.; 9- 18 sc.; 10- 5 sc., 1 inc. to eor = 21 sc.; 11- 21 sc.; 12- 2 sc., 1 inc. to eor = 28 sc. Change to the Amigurumi Pelúcia yarn #8001 (White) 13 to15 (3 rounds)- 28 sc. Fasten off.   Pom-pom With the Amigurumi Pelúcia yarn #8001 (White) and 2.5 mm hook 1- 6 sc. inside of a magic ring; 2- 6 sc. Fasten off and weave the yarn around to close. Tie or glue it to the tip of the hat.   Scarf With the Amigurumi Pelúcia yarn #8001 (White) Go up 35 ch., skip the 1st one, and work 34 sc. Fasten off. Created by: Fabiana Gonçalves (@atelielinhaseagulhas) Pattern review by: Patty Wolf Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/06/2024 Level of difficulty   Stitch Glossary & Abbreviations: Increase = inc.; Chain = ch.; Decrease = dec.; Double Crochet = dc.; Slip Stitch = sl st.; Single Crochet = sc.; End of Round = eor; Place Marker = pm. Back Loops Only = BLO.   Instructions Christmas Cane Materials: 1 Amigurumi yarn ball – Colors: #3528 (Carmine) & #8001 (White); Crochet hook – 3.0 mm; Pipe cleaner – 30 cm/12 inch.; Polyester stuffing; Tapestry needle; Locking stitch marker.   Approximate size:  2.35” height.   Instructions: Start with the Amigurumi yarn #8001 (White) 1- 8 sc. inside of a magic ring; 2- BLO: 8 sc. Note: pm. on first sc.; Change to the Amigurumi yarn #3528 (Carmine) Don’t cut the Amigurumi yarn #8001 (White) 3- 8 sc. Until rnd. 21, work 8 sc., alternating colors 4 to 20 (even rounds)- 8 sc. with Amigurumi yarn #8001 (White); 5 to 21. (odd rounds)- 8 sc. with Amigurumi yarn #3528 (Carmine). Place the pipe cleaner inside the cane, folded with approximately 3 inches. Fasten off with a reverse magic ring. Christmas Sock Materials: 1 Amigurumi yarn ball – Colors: #3528 (Carmine) & #5767 (Brazilian Green); Crochet hook – 3.0 mm; Polyester stuffing; Tapestry needle; Locking stitch marker.   Approximate size:  2.5” height.   Instructions: Start with the Amigurumi yarn #5767 (Brazilian Green) 1- 8 sc. inside of a magic ring; 2- 8 inc. = 16 sc. Note: pm. on first sc. ; 3 & 4- 16 sc. Change to the Amigurumi yarn #3528 (Carmine) 5 to 10 (6 rounds)- 16 sc. Change to the Amigurumi yarn #5767 (Brazilian Green) 11 to 13 (3 rounds)- 8 sc., 1 ch. (TURN); 14- 8 sc. Fasten off, leaving a yarn tail to close the heel. Change to the Amigurumi yarn #3528 (Carmine) Attach the yarn to the 1st stitch on the right side of the heel seam and make: 15 to 20 (6 rounds): 18 sc. Change to the Amigurumi yarn #5767 (Brazilian Green) 21 & 22- 18 sc.; 23- BLO: 1 sc., 1 dec. to eor = 12 sc. Stuff the piece a little.. 24- 2 sc., 1 dec. to eor = 9 sc. Fasten off with a reverse magic ring. Close the heel with the yarn left at the end of rnd. 14: fold and close the sides with 4 sc. Christmas Glove Materials: 1 Amigurumi yarn ball – Color: #3528 (Carmine); 1 Amigurumi Pelúcia yarn ball – Color: #8001 (White); Crochet hook – 3.0 mm; Polyester stuffing; Tapestry needle; Locking stitch marker.   Approximate size:  2.35” height.   Instructions: Start with the Amigurumi yarn #3528 (Carmine) 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc. ; 3- 1 sc., inc. to eor = 18 sc.; 4- 2 sc., 1 inc. to eor = 24 sc.; 5 to 8 (4 rounds)- 24 sc.; 9- 12 sc., 5 dc. together in the same base stitch, 11 sc. = 24 stitches; 10- 12 sc., 5 dc. closed together, 11 sc. = 24 stitches; 11 & 12- 24 sc.; 13- 4 sc., 1 dec. to eor = 20 sc. Change to the Amigurumi Pelúcia yarn #8001 (White) 14 to 16. (3 rounds)- 20 sc.; 17- BLO: 8 sc., 1 dec. to eor = 18 sc.; 18- 1 sc., 1 dec. to eor = 12 sc. Stuff the piece a little. 19- 2 sc., 1 dec. to eor = 9 sc. Fasten off with a reverse magic ring.   Christmas Star Materials: 1 Amigurumi Sparkle yarn ball – Color: #7030 (Mustard); Crochet hook – 3.0 mm; Polyester stuffing; Tapestry needle; Locking stitch marker.   Approximate size:  3.15” height.   Instructions: With the Amigurumi Sparkle yarn #7030 (Mustard) 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc. ; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 2 sc., 1 inc. to eor = 24 sc.; 5- 3 sc., 1 inc. to eor = 30 sc. Make another identical piece. Start joining the two parts (wrong sides together), making the first tip: 1- 6 sc. in the first part, 6 sc. in the second part = 12 sc.; 2- 12 sc.; 3- 4 sc., 1 dec. to eor = 10 sc.; 4- 10 sc.; 5- 1 dec., 3 sc. to eor = 8 sc.; 6- 8 sc.; 7- 2 sc., 1 dec. to eor = 6 sc. Fasten off with a reverse magic ring, leaving a yarn tail to close the holes between the tips. Repeat the process on tips 2, 3, 4 and 5.Stuff the piece before starting the 5th tip. Christmas Tree Materials: 1 Amigurumi Sparkle yarn ball – Color: #5767 (Brazilian Green); 1 Amigurumi yarn ball – Color: 7569 (Brownie); Crochet hook – 3.0 mm; Polyester stuffing; Tapestry needle; Locking stitch marker.   Approximate size:  3.35” height.   Instructions: With the Amigurumi yarn #7569 (Brownie) 1- 8 sc. inside of a magic ring; 2- BLO: 8 sc. Note: pm. on first sc.; 3- 8 sc. Change to the Amigurumi Sparkle yarn #5767 (Brazilian Green) 4- 8 inc. = 16 sc.; 5- 1 sc., 1 inc. to eor = 24 sc.; 6- 3 sc., 1 inc. to eor = 30 sc.; 7- BLO: 30 sc.; 8- 8 sc., 1 dec. to eor = 27 sc.; 9- BLO: 27 sc.; 10- 7 sc., 1 dec. to eor = 24 sc.; 11- BLO: 24 sc.; 12- 6 sc., 1 dec. to eor = 21 sc.; 13- BLO: 21 sc.; 14- 5 sc., 1 dec. to eor = 18 sc.; 15- BLO: 18 sc.; 16- 4 sc., 1 dec. to eor = 15 sc.; 17- BLO: 15 sc.; Stuff the piece. 18- 3 sc., 1 dec. to eor = 12 sc.; 19- BLO: 12 sc.; 20- 2 sc., 1 dec. to eor = 9 sc.; 21- BLO: 9 sc.; 22- 1 sc., 1 dec. to eor = 6 sc. Finish stuffing. Fasten off with a reverse magic ring.  Attach the Amigurumi Sparkle yarn #5767 (Brazilian Green)  in the left over loops and work 3 ch., closing in the next base loop with sl st. Do this on the entire piece. Christmas Hat Materials: 1 Amigurumi yarn ball – Color: #3528 (Carmine); 1 Amigurumi Pelúcia yarn ball – Color: #8001 (White); Crochet hook – 3.0 mm; Polyester stuffing; Tapestry needle; Locking stitch marker.   Approximate size:  2.35” height.   Instructions: Start with the Amigurumi Pelúcia yarn #8001 (White) 1- 6 sc. inside of a magic ring; 2- 1 sc., 1 inc. to eor = 9 sc. Note: pm. on first sc. ; 3- 1 sc., 1 dec. to eor = 6 sc. Change to the Amigurumi Sparkle yarn #3528 (Carmine) 4 & 5- 6 sc.; 6- 1 sc., 1 inc. to eor = 9 sc.; 7- 9 sc.; 8- 2 sc., 1inc. to eor = 12 sc.; 9- 12 sc. Stuff the little pom-pom. 10- 3 sc., 1 inc. to eor = 15 sc.; 11- 15 sc.; 12- 4 sc., inc. to eor = 18 sc.; 13- 5 sc., 1 inc. to eor = 21 sc.; 14- 3 sc., 1 inc., (6 sc., 1 inc.) 2x, 3 sc. = 24 sc.; 15- 7 sc., 1 inc. to eor = 27 sc.; 16- 4 sc., 1 inc., (8 sc.,inc.) 2x, 4 sc. = 30 sc.; 17 to 20 (4 rounds)- 30 sc. Fold the top edge as shown in the photo and sew. Change to the Amigurumi Pelúcia yarn #8001 (White) 21 & 22- 30 sc.; 23- 3 sc., 1 dec. to eor = 24 sc.; 24- 2 sc., 1 dec. to eor = 18 sc.; 25- 1 sc., 1 dec. to eor = 12 sc. Stuff the piece. 26- 2 sc., 1 dec. to eor = 9 sc. Fasten off with a reverse magic ring. Mini Christmas Wreath Materials: 1 Amigurumi Sparkle yarn ball – Colors: #7030 (Mustard), #3528 (Carmine) & #5767 (Brazilian Green); Crochet hook – 3.0 mm; Polyester stuffing; Tapestry needle; 1 small bell; Locking stitch marker.   Approximate size:  3.35” height.   Instructions: With the Amigurumi yarn #3528 (Carmine) Go up 43 ch., skip 3 ch. Work 4 dc. together in the same base st. until the end of round. Fasten off, leaving a yarn tail for sewing. Make another identical piece with the Amigurumi Sparkle yarn #5767 (Brazilian Green). Wrap one piece around the other, ring by ring.Close each piece as a circle, sewing the ends together. Bow With the Amigurumi Sparkle yarn #7030 (Mustard) Go up 25 ch., skip the 1st one. 1- 24 sc., 1 ch. (TURN); 2 & 3- BLO: 24 sc.; 4- 24 sc. Fasten off, leaving a yarn tail for sewing. Sew the ends together, passing through the middle to form a loop. Sew on the bell with the same yarn. Snowman Ball Materials: 1 Amigurumi yarn ball – Colors: #8001 (White), #4456 (Orange), #5767 (Brazilian Green) & 3528 (Carmine); Rubi Sparkling – Color: #8990 (Black); Crochet hook – 3.0 mm; Polyester stuffing; Tapestry needle; Círculo Fabric Glue; Locking stitch marker.   Approximate size:  2” height.   Instructions: Head With the Amigurumi yarn #8001 (White) 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 2 sc., 1 inc. to eor = 24 sc.; 5- 3 sc., 1 inc. to eor = 30 sc.; 6 to 10 (5 rounds)- 30 sc.; 11- 3 sc., 1 dec. to eor = 24 sc. Embroider the eyes with Rubi yarn #8990,  over rnd. 9 by 2 stitches, 5 stitches apart. 12- 2 sc., 1 dec. to eor = 18 sc.;  13- 1 sc., 1 dec. to eor = 12 sc. Stuff the piece. 14- 2 sc., 1 dec. to eor = 9 sc. Fasten off with a reverse magic ring. Embroider the mouth with Rubi yarn #8990,  on rounds 5 and 6, sideways. Nose With the Amigurumi yarn #4456 (Orange) 1- 4 sc. inside of a magic ring; 2- 1 sc., 1 inc., 2 sc. = 5 sc. Note: pm. on first sc.; 3- 1 inc., 4 sc. = 6 sc. Fasten off, leaving a yarn tail for sewing. Sew on the head, over rnd. 7, centered between the eyes. Hat With the Amigurumi yarn #5767 (Brazilian Green) 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- BLO: 18 sc.; 5- 4 sc., 1 dec. to eor = 15 sc.;  6- 15 sc. Change to the Amigurumi yarn #3528 (Carmine) Don’t cut the Amigurumi yarn #5767 (Brazilian Green)   7- 15 sc. Change back to the Amigurumi yarn #5767 (Brazilian Green)   Cut the Amigurumi yarn #3528 (Carmine). 8- 3 ch. (counts as 1 dc.), 1 dc. in the same base st. of the ch., 14 inc. of dc. = 30 dc. Fasten off. Stuff a little and glue it to the side of the head. Gingerbread Ball Materials: 1 Amigurumi yarn ball – Colors: #7650 (Almond) & #8001 (White); Amigurumi yarn scraps – Colors: # 3131 (Bubble Gum), #1730 (Candy Yellow), #2204 (Candy Green) & #2012 (Candy Blue); Rubi Sparkling – Colors: #8990 & #3628; Crochet hook – 3.0 mm; Polyester stuffing; Tapestry needle; Círculo Fabric Glue; Locking stitch marker.   Approximate size:  2” height.   Instructions: Head With the Amigurumi yarn #7650 (Almond) 1- 6 sc. inside of a magic ring; 2- 6 inc. = 12 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 18 sc.; 4- 2 sc., 1 inc. to eor = 24 sc.; 5- 3 sc., 1 inc. to eor = 30 sc.; 6 to 10 (5 rounds)- 30 sc.; 11- 3 sc., 1 dec. to eor = 24 sc. Embroider the eyes with Rubi yarn #8990,  over rnd. 9 by 2 stitches, 4 stitches apart. 12- 2 sc., 1 dec. to eor = 18 sc.;  13- 1 sc., 1 dec. to eor = 12 sc. Stuff the piece.. 14- 2 sc., 1 dec. to eor = 9 sc. Fasten off with a reverse magic ring. Embroider the mouth with Rubi yarn #8990,  on rounds 6 and 7. Frosting With the Amigurumi yarn #8001 (White) 1- 7 sc. inside of a magic ring; 2- 7 inc. = 14 sc. Note: pm. on first sc.; 3- 1 sc., 1 inc. to eor = 21 sc. 4- (Skip 1 base st., 4 dc. together in the same base st., skip 1 base st., 1 sc.) 5x. Finish with 1 sl st. Fasten off. With the Amigurumi yarns #3131 (Bubble Gum), #1730 (Candy Yellow), #2204 (Candy Green) & 2012 (Candy Blue), embroider the sprinkles on top of the frosting, then glue them to the top of the head. Cord With the Amigurumi yarn #3528 (Carmine) Repeat (30 ch., attach one of the finished pieces with 1 sc.), until all the pieces are attached and finish with 30 ch. Fasten off. Created by: Kelly Stopassoli (@kellyamigurumi) Pattern review by: Patty Wolf Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

12/06/2024 Level of difficulty Measurements: 45” x 36.5”   Materials: 18 skeins Merino Supreme - Color 5007/Juniper 9.00mm crochet hook Scissors Yarn needle Abbreviations: Ch - chain Sk - skip St - stitch Dc - double crochet Fpdc - front post double crochet Bpdc - back post double crochet *If you would like to make a bigger blanket, make a foundation ch with a multiple of 8 + 4   Pattern Instructions: Ch 100 Row 1: Sk 3 chs (count as 1 dc), 1 dc into the next ch and in each ch across. Turn. Row 2: Ch 2 (count as 1 dc), sk 1st st, *1 fpdc around each of the next 4 sts, 1 bpdc around each of the next 4 sts,* repeat from * across ending with 1 dc into the top of the turning ch. Row 3-5: Repeat Row 2 Row 6: Ch 2 (count as 1 dc), sk 1st st, *1 bpdc around each of the next 4 sts, 1 fpdc around each of the next 4 sts,* repeat from * across ending with 1 dc into the top of the turning ch. Row 7-10: Repeat Row 6 Repeat Rows 2-10 five more times or until desired length. Do not finish off. Move on to the border. Border Round 1: Ch 2, hdc evenly around the entire blanket, placing 3 hdc in each corner. Join with a sl st in the first hdc. Round 2: Ch 2, 1 hdc in each st around, placing 3 hdc in each corner (2nd hdc of the 3 hdc you made in the previous round). Join with a sl st to the first hdc. Round 3: *Ch 3, sl st in the first ch of the ch 3 you just made (picot made), sk one st, sl st in the next st,* repeat from * all the way around. Finish off, weave in ends.. Crochet Pattern by Hands of Zeal Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

11/29/2024 Level of difficulty Size: 18” x 18”   Materials: 1 Natural Cotton Maxcolor Sparkle yarn roll– Colors: 8001 (White), 3501 (Chili Pepper) & 5767 (Brazilian Green) 1 Natural Cotton Maxcolor 4/6 (14 oz) yarn roll – Color: 8001 (White) 1 Encanto yarn roll – Color: 1013 (Golden Grass) Círculo Crochet Hook 3.5 mm Tapestry needle   Gauge: Each motif from Chart 1, made with Natural Cotton Maxcolor Sparkle yarn and a 3.5 mm hook, measures 3.15 x 3.15 inches.   Stitch Glossary & Abbreviations:  st. (Stitch), sts. (Stitches), ch. (Chain), sl st. (Slip Stitch), rnd/r. (Round/Row), sc. (Single Crochet), dc. (Double Crochet), Magic Ring.   Instructions:   Chart 1 With the Chilli Pepper yarn, start with a magic ring. 1- Start with 3 ch., 2 dc., 2 ch., 3 dc., 2 ch. , repeat from to 2x more. Close with sl st. Fasten off the yarn. 2- Join the White (Sparkle) yarn, start the rnd. with: 3 ch., 2 dc., 2 ch., 3 dc. in the same base space. Skip 3 base sts., and work: in the 2 base ch.: 3 dc., 2 ch., 3 dc., skip 3 base st. , repeat from to 2x more. Close with 1 sl st. Fasten off the yarn. Continue following chart 1, making the appropriate color changes. Fasten off the yarns. Make 4 identical motifs and, using a tapestry needle, join them with hand stitching, following the assembly diagram.   Chart 2 Attach the white yarn to one of the corners. 1- In the corner, start with 3ch., 2 dc., 2 ch., and 3 dc. in the same base space., work the lateral skipping 3 base sts., 3 dc. between the 2 base block. In the corner, work: 3 dc., 2 ch. and 3 dc. in the same base space , repeat from to all the way arounf the round. Close with sl st. Continue following chart 2, working in circular rounds, making the appropriate color changes. Fasten off.   Chart 3 – Back Part 1 Attach the white yarn to one of the corners. 1- Start with 5 ch., skip 2 base sts., 1 dc. in the 2nd dc. of the base block, 2 ch., skip 3 base sts. , repeat from to until the end of row. Finish with 1 dc. 2 to 21- Start with 5 ch., skip 2 base sts., 1 dc. , repeat from to until the end of row. Fasten off.   Chart 4 – Back Part 2 With the White yarn, start with 71 ch. 1- Start in the 8th ch. from the hook, work: 1 dc., 2 ch., skip 2 base sts. , repeat from to until the end of row. Finish with 1 dc. 2 to 12- Start with 5 ch., skip 2 base sts., 1 dc. , repeat from to until the end of row. Fasten off.   Chart 5 – Finishing & Joining Position the two pieces, overlapping one over the other, on the back side of the front part of the pillow.Join the White yarn in one of the corners, working around the entire edge of the piece to join the front part with the two back pieces. 1- In the corner, make 4 sc. in the same base space, on the side, work 1 sc. for each base st. , repeat from to , working around the entire piece, joining the front to the back part. Close with 1 sl st. Fasten off.   Cord: Make 30 ch., secure with 1 sc. on one side of the opening, and make 30 more ch. Fasten off the yarn. Work 3 cords on the back, on one side of the opening, leaving a space of 6 "squares" between each cord.   Designer: Heloisa Mazoni Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

11/29/2024 Level of difficulty Approximate size:   24” x 15.75”   Materials: 1 Náutico Slim yarn roll – Color: 8001 (White) 1 Náutico Poly yarn roll – Colors: 5767 (Brazilian Green) & 3402 (Círculo Red) Crochet Hook – 6.0 mm   Gauge: A 4-inch square, made in sc. using Náutico Poly yarn and a 6.0 mm hook, measures 10 sts. x 11 rows.   Stitch Glossary & Abbreviations:  st. (Stitch), sts. (Stitches), ch. (Chain), sl st. (Slip Stitch), rnd/r. (Round/Row); sc. (Single Crochet), BL sc (Back Loop Single Crochet).   Instructions:   Start with the Círculo Red yarn, make 57 ch. + 1 ch. to turn the work. 1- Start in the 2nd ch. from the hook, work: 57 sc. 2 to 4- Rem. o fio.Start with 1 ch., 57 BL sc. Continue following the chart, working in back-and-forth rows, making the appropriate color changes. Fasten off the yarn.   Designer: Heloisa Mazoni Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

11/29/2024 Level of difficulty Size:  17.7” in diameter   Materials: 1 Natural Cotton Maxcolor 4/6 (7 oz) yarn roll – Color: 8001 (White) 1 Natural Cotton Maxcolor Sparkle yarn roll – Color: 5767 (Brazilian Green) & 3501 (Chilli Pepper) Círculo Crochet Hook - 3.5 mm   Gauge: A 4-inch square in fantasy st., made with Natural Cotton Maxcolor 4/6 and a 3.5 mm hook = 15 sts. x 7 rows.   Stitch Glossary & Abbreviations:  st. (Stitch), sts. (Stitches), ch. (Chain), sl st. (Slip Stitch), rnd/r. (Round/Row); sc. (Single Crochet), dc. (Double Crochet), Set of Puff st. (Set of 5 Puff Stitches with 4 loops each closed together), Bp tr (Back Post Treble Crochet), Magic Ring.   Instructions:   With the White yarn, start with a magic ring, 1- Start with 3 ch., 11 dc. Close with sl st. Set the yarn aside. 2- Join the Chilli Pepper yarn, work with 1 sl st. for each base st. Fasten off the yarn. 3- Continue with the White yarn reserved from the 1st rnd., and work leaving the sl sts. from the previous rnd. at the front of the piece: start with 3ch., 1 dc. in the same base st., 2 dc. in the same base st. , repeat from to until the end of round. Close with sl st. 4- Start with 3 ch., 2 dc. in the same base st., 1 dc., 2 dc. in the same base st. , repeat from to until the end of round. Close with sl st. Set the yarn aside. 5- Join the Chilli Pepper yarn, work with 1 sl st. for each base st. Fasten off the yarn.   Continue following the chart, working in circular rnd., making the appropriate color changes. Fasten off the yarns.   Make 2 identical pieces.   Designer: Heloisa Mazoni Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

11/28/2024 Level of difficulty Approximate size: 2.4 inches tall.   Materials: 1 Amigurumi yarn ball– Colors: #3528 (Carmine) & #8990 (Black); 1 Amigurumi Pelúcia yarn ball – Color: #8001 (White); Encanto Slim – Color: 7577 (Gold); Crochet hook – 3.0 mm & 2.0 mm; Tapestry needle; Locking stitch marker.   Stitch Glossary: Chain = ch.; Single Crochet = sc.   Instructions:   Start with Amigurumi yarn #3528 (Carmine) and 3.0 mm hook Make 30 ch., and close in a circle in the 1st ch. with 1 sc. 1 to 5 (5 rounds): 30 sc. Change to Amigurumi yarn #8990 (Black) and 3.0 mm hook 6 & 7- 30 sc. Change to Amigurumi yarn #3528 (Carmine) and 3.0 mm hook 8 to12 (5 rounds)- 30 sc. Change to Amigurumi Pelúcia yarn #8001 (White)   and 3.0 mm hook 13 & 14- 30 sc. Fasten off. Join the Amigurumi Pelúcia yarn #8001 (White)  on the other side of the foundation ch. and make 2 rnd. of 30 sc. each.   Belt With the Encanto Slim yarn #7577 (Gold)   and 2.0 mm hook Make a cord with 30 ch. Fasten off, leaving a yarn tail for sewing. Sew it over the belt, forming a rectangle over 2 sts. and 3 rnd.   Created by: Kelly Stopassoli (@kellyamigurumi) Pattern review by: Patty Wolf Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...

11/28/2024 Level of difficulty Size: 5.1” tall x 4.9” in diameter   Materials: 1 Premium T-Shirt yarn roll – Colors: 5767 (Brazilian Green) & 3528 (Carmine) 1 Encanto yarn roll – Color: 7326 (Old Gold) Crochet hook – 8.0 mm   Stitch Glossary & Abbreviations:  st. (Stitch), sts. (Stitches), rnd. (Round), ch. (Chain), sl st. (Slip Stitch),   sc. (Single Crochet), Wc st. (Waistcoat Stitch), inc. (increase of 2 waistcoat stitches in the same base stitch), Magic Ring, Invisible Round Closure (Slip the loop off the hook, insert it into the first stitch of the round, pull the loop through, and remove it from the hook, setting it aside for the next step. Insert the hook into the middle of the stitch formed, yarn over, and pull it to the front. Insert the hook into the reserved loop, yarn over, and pull through both loops at once.)   Instructions:   Chart 1 - Bottom With the Brazilian Green yarn, start with a magic ring. Work in circular rnd., closing each rnd. with an invisible round closure. 1- 8 wc st. inside the magic ring 2- 8 inc. (16) 3- (1 wc st.., 1 inc.) x8 (24) 4- (2 wc st., 1 inc.) x8 (32) 5- 32 wc st. 6- Work on the wrong side of the piece: 32 sl st. Set the yarn aside.   Chart 2 - Side   The lateral of the basket uses the tapestry crochet technique. In this technique, work with 2 or more yarns in the same round, changing colors as indicated by the chart. To change colors, finish the last 2 loops on the hook with the new color, and hide the unused yarn over the previous round, weaving it between the stitches of the new color.   Continue with the Brazilian Green yarn from chart 1. Work in circular rnd., closing each rnd. with an invisible round closure. 1- Work in the sl st. of the last rnd. of the bottom: 32 wc st. 2- Join the Carmine and Old Gold yarns (work with double yarn, using the 2 yarns together), extend them over the base round. With the Brazilian Green yarn, work 9 wc st., change to the Carmine and Old Gold yarns, 1 wc st., change to the Brazilian Green yarn, 22 wc st.Continue following chart 2, working in circular rounds, making the appropriate color changes.Fasten off the yarns, but reserve the Brazilian Green yarn from the last color change. Chart 3 – Finishing Continue with the Brazilian Green yarn from chart 2. 1- 32 sl st. Fasten off.   Designer: Rosana Recchia Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern. See more about...